MAX14821ETG+

MAX14821ETG+ is a transceiver that is suitable for IO-Link® devices and 24V binary sensors/actuators. All specified IO-Link data rates are supported. In IO-Link applications, the transceiver acts as the physical layer interface to a microcontroller running the data-link layer protocol. Additional 24V digital inputs and outputs are provided. Two internal linear regulators generate common sensor and actuator power requirements: 5V and 3.3V. On-board C/Q and DO drivers are independently configurable for push-pull, high-side (PNP), or low-side (NPN) operations. The device detects the IO-Link C/Q wake-up condition and generates a wake-up signal on the active-low WU output. The C/Q and DI inputs have selectable current loads for use in actuators. The device features reverse polarity, short-circuit, and thermal protection. All power lines are monitored for undervoltage conditions. Applications include IO-link sensors industrial sensors and actuators, IO-link actuators.

• Std compliance ensures future-proof solutions, IO-link versions 1.0 and 1.1.2, IEC IEC61131.9 SDCI
• High configurability and integration reduces SKUs, push-pull, PNP, or NPN driver configuration
• Supports COM1, COM2, and COM3 data rates, SPI interface for control and monitoring
• 2.5V to 5V logic interface levels, auxiliary 24V, 100mA digital output (DO)
• Auxiliary 24V digital input (DI), 100mA specified C/Q output drive, integrated 5V and 3.3V regulator
• Integrated protection enables robust solutions, extensive fault-monitoring and reporting
• Reverse-polarity and short-circuit protection on all 24V outputs/inputs
• VCC supply voltage range from 9 to 36V for driver operation
• 24 TQFN-EP package
• Temperature range from -40°C to +85°C