MAX14611ETD+T

The MAX14611ETD+T is a quad bidirectional logic level translator in 14 pin TDFN package. The device provides necessary level shifting to allow data transfer in a multivoltage system, externally applied voltages, VCC and VL set the logic levels on either side of the device. A logic signal present on the VL side of the device appears as the same logic signal on the VCC side of the device and vice-versa. It is ideal for I²C bus as well as MDIO bus applications where open-drain operation is required. MAX14611 is a pin to pin compatible upgrade to the MAX3378E. It has an enhanced high electrostatic-discharge (ESD) protection on all I/OVCC ports up to ±6kV HBM (Human Body Model).

• Supply voltage range is 1.65V to 5.5V
• Operating temperature range from -40°C to 85°C
• Data rate of 20Mbps
• Shutdown current of 1µA
• Improved interoperability
• Robust logic level translation, thermal short-circuit protection
• Ultra-low supply current
• Pull-up resistor enabled with single power supply when active-low TS = high

Notas

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party