MAX4906FELB+T

MAX4906FELB+T is a high-/full-speed USB 2.0 dual SPDT analog switch. It combines the low on-capacitance (CON) and low on-resistance (RON) necessary for high-performance switching applications. This device is designed for USB 2.0 high-speed applications at 480Mbps. This switch will also handle all the requirements for USB low- and full-speed signaling. It features two single-pole/double-throw (SPDT) switches. This device is fully specified to operate from a single +3.0V to +3.6V power supply and are protected against a +5.5V short to COM1 and COM2. This feature makes them fully compliant with the USB 2.0 specification of +5.5V fault protection. This device features a low threshold voltage and a +1.4V VIH, permitting them to be used with low-voltage logic. It is used in applications such as cell phones, PDAs, digital still cameras, GPS, notebook computers, relay replacements, USB switching, ethernet switching, video switching, bus switches, T3/E3 Switches for redundancy protection.

• On-resistance is 4 ohm typical at (ICOM = -40mA, TA = +25°C)
• On-resistance match between channel is 0.7 ohm typ at (V+ = 3.0V, TA = +25°C)
• 1000MHz typ on-channel -3dB bandwidth at (RL = RS = 50 ohm, signal = 0dBm)
• Output skew between switches is 100ps max at (V+ = 3.3V, TA = +25°C)
• Shutdown input reduces power consumption to 2µA maximum at (TA = +25°C)
• Off-isolation is -60dB typ at (f = 10MHz; VNO-, VNC- = 1VP-P; RL = RS = 50 ohm, TA = +25°C)
• COM analog inputs fault protected against shorts to USB supply rail upto +5.5V
• Quiescent supply current is 120µA typ at (V+ = 3.6V, VIN = 0 or V+, SHDN or SHDN/EN = 0)
• 3.3V, 1.8V, and 1.4V logic compatible, THD is 0.03% typ at (VCOM- = 2VP-P, RL = 600 ohm)
• Operating temperature range from -40°C to +85°C, 10µDFN package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party