MAX3093ECPE+

The MAX3093ECPE+ is a ±15KV ESD-protected, 10Mbps, 5V, low power quad RS422/RS485 receiver in 16 pin DIP package. This rugged, low power RS422/RS485 receiver features electrostatic discharge (ESD) protection for use in harsh environments. Receiver's inputs are protected to ±15KV using IEC 1000-4-2 air-gap discharge, ±8KV using IEC 1000- 4-2 contact discharge and ±15KV using the human body model. The receiver has a fail-safe feature that gives a logic high output if the input is open circuit. This device is used in telecommunications equipment, level translators and ESD sensitive applications.

• Supply voltage range is 4.75V to 5.25V
• Operating temperature range from 0°C to 70°C
• Propagation delay tolerance is ±8ns
• Allow up to 128 receivers on the bus
• low power shutdown mode with 1nA
• Supply current of 2.4mA at No load, output enabled
• Pin compatible upgrades to 34C86

Applications

Communications & Networking

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party