LTC2410IGN#PBF

LTC®2410 is a 2.7V to 5.5V micropower 24bit differential ∆Σ analog to digital converter with an integrated oscillator, 2ppm INL and 0.16ppm RMS noise. It uses delta-sigma technology and provides single cycle settling time for multiplexed applications. Through a single pin, the LTC2410 can be configured for better than 110dB input differential mode rejection at 50Hz or 60Hz ±2%, or it can be driven by an external oscillator for a user-defined rejection frequency. The internal oscillator requires no external frequency setting components. Typical applications include direct sensor digitizers, weight scales, direct temperature measurements, gas analyzers, strain-gauge transducers, instrumentation, data acquisition industrial process control and 6-digit DVMs.

• Differential input and differential reference with GND to VCC common mode range
• 2ppm INL, no missing codes, 2.5ppm full-scale error, 0.1ppm offset and 0.16ppm noise
• Low supply current (200µA) and auto Shutdown
• Single conversion settling time for multiplexed applications
• Internal oscillator- no external components required
• 110dB min, 50Hz or 60Hz notch filter
• Single supply 2.7V to 5.5V operation
• Fully differential version of LTC2400
• 16 lead SSOP package
• Operating temperature range from -40°C to 85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party