
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | AD8018ARZCopy |
| Manufacturer Standard Lead Time | 12 weeks |
| Newark Part No. | 53AK9858 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Quantity | Price |
|---|---|
| 1+ | $11.190 |
| 10+ | $8.750 |
| 25+ | $8.330 |
| 50+ | $7.900 |
| 100+ | $7.480 |
| 250+ | $7.230 |
Product Information
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | AD8018ARZCopy |
| Manufacturer Standard Lead Time | 12 weeks |
| Newark Part No. | 53AK9858 |
| Technical Datasheet | |
| Device Type | Line Drive Amplifier |
| IC Interface Type | ADSL, xDSL |
| Interfaces | ADSL, xDSL |
| Supply Voltage Min | 3.3V |
| Supply Voltage Max | 8V |
| IC Case / Package | SOIC |
| No. of Pins | 8Pins |
| No. of Drivers | 2Drivers |
| Product Range | - |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (04-Feb-2026) |
Product Overview
AD8018 is a line drive amplifier intended for use in single-supply (5V) xDSL modems where high-output current and low distortion is essential to achieve maximum reach. The dual high-speed amplifier is capable of driving low distortion signals to within 0.5V of the power supply rail. This amplifier can drive 400mA of current into 10 ohms (differential) while maintaining -82dBc out-of-band SFDR. Two digital logic bits (PWDN1 and PWDN0) may be used to put the AD8018 into one of three modes: full power, standby (outputs low impedance), and shutdown (outputs high impedance). Application includes xDSL USB, PCI, PCMCIA cards, consumer DSL modems, and twisted pair line driver.
- Rail-to-rail output voltage and high output current
- Low single-tone distortion
- Low noise, low-power operation
- Current feedback amplifiers, high speed
- Typical -3dB bandwidth is 50MHz (G=1, VOUT <lt/> 0.4V p-p, RL=5ohm)
- Typical slew rate is 300V/ s (noninverting, VOUT=4V p-p)
- Typical settling time is 25ns (0.1%, VOUT=2V p-p, RL=100 ohm)
- Typical CMRR is 54dB (at 25°C, VS=5V, RL=100 ohm, RF=RG=750 ohm)
- 8-lead plastic SOIC package
- Temperature rating range from -40°C to +85°C
Notes
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technical Specifications
| Device Type | Line Drive Amplifier |
|---|---|
| Interfaces | ADSL, xDSL |
| Supply Voltage Max | 8V |
| No. of Pins | 8Pins |
| Product Range | - |
| Operating Temperature Max | 85°C |
| SVHC | No SVHC (04-Feb-2026) |
| IC Interface Type | ADSL, xDSL |
|---|---|
| Supply Voltage Min | 3.3V |
| IC Case / Package | SOIC |
| No. of Drivers | 2Drivers |
| Operating Temperature Min | -40°C |
| MSL | MSL 1 - Unlimited |
Technical Docs (3)
Legislation and Environmental
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Download Product Compliance Certificate | Product Compliance Certificate |
