AD7403BRIZ

AD7403 is a high performance, second-order, Σ-Δ modulator. It converts an analog input signal into a high speed, single-bit data stream, with on-chip digital isolation based on Analog Devices, Inc., icoupler® technology. The differential input is ideally suited to shunt voltage monitoring in high voltage applications where galvanic isolation is required. It is approved by UL recognition, 5000V rms for 1 minute per UL 1577, CSA Component Acceptance Notice 5A, VDE Certificate of Conformity, DIN V VDE V 0884-10 (VDE V 0884-10):2006-12, VIORM = 1250V PEAK. It is widely used in application such as AC motor controls, power and solar inverters, wind turbine inverters, data acquisition systems, analog-to-digital and optoisolator replacements etc.

• Resolution is 16bits, no missing codes
• Signal-to-noise ratio (SNR) is 88dB typical
• Effective number of bits (ENOB) is 14.2bits typical
• Offset drift vs. temperature is 2µV/°C typical
• On-board digital isolator, on-board reference
• Full-scale analog input range is ±320mV
• High common-mode transient immunity is <gt/>30KV/µs typ
• Power dissipation is 237mW typ at (VDD1 = VDD2 = 5.5V)
• Operating temperature is −40°C to +125°C
• Package style is 16-lead standard small outline package, with increased creepage [SOIC-IC]

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party