
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | 5962-8757103XACopy |
| Newark Part No. | 50AK7784 |
| Your Part Number | |
| Technical Datasheet |
Product Information
| Manufacturer | ANALOG DEVICES |
|---|---|
| Manufacturer Part No | 5962-8757103XACopy |
| Newark Part No. | 50AK7784 |
| Technical Datasheet | |
| IC Output Type | Current |
| Sensor Output Type | Analogue |
| Sensing Accuracy Range | ± 1°C |
| Accuracy | ± 1°C |
| Sensing Accuracy Range | ± 1°C |
| Sensing Temperature Min | -55°C |
| Measured Temperature Min | -55°C |
| Sensing Temperature Max | 150°C |
| Measured Temperature Max | 150°C |
| Sensor Case Style | Flatpack |
| Sensor Case / Package | Flatpack |
| No. of Pins | 2Pins |
| Supply Voltage Min | 4V |
| Supply Voltage Max | 30V |
| No. of Channels | - |
| Resolution | - |
| Output Interface | - |
| Operating Temperature Min | -55°C |
| Operating Temperature Max | 150°C |
| Product Range | - |
| Qualification | - |
| Automotive Qualification Standard | - |
| SVHC | Lead (23-Jan-2024) |
Product Overview
5962-8757103XA is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4V and 30V, the device acts as a high impedance, constant current regulator passing 1μA/K. Laser trimming of the chip’s thin-film resistors is used to calibrate the device to 298.2μA output at 298.2 K (25°C). This device should be used in any temperature-sensing application below 150°C in which conventional electrical temperature sensors are currently employed. The inherent low cost of a monolithic integrated circuit combined with the elimination of support circuitry makes the device an attractive alternative for many temperature measurement situations. Linearization circuitry, precision voltage amplifiers, resistance measuring circuitry, and cold junction compensation are not needed in applying the device.
- Probe-compatible ceramic sensor package
- 2-terminal device: voltage in/current out
- Current noise is 40pA/√Hz typical at (25°C and VS = 5V)
- Power supply rejection ratio is 0.5µA/V typ at (4V ≤ VS ≤ 5V, 25°C and VS = 5V)
- Wide power supply range from 4V to 30V
- Sensor isolation from case
- Long-term drift is ±0.1°C maximum at (25°C and VS = 5V)
- Repeatability is ±0.1°C maximum at (25°C and VS = 5V)
- Operating temperature range from -55°C to 150°C
- Package style is 2-pin flatpack
Notes
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Technical Specifications
| IC Output Type | Current |
|---|---|
| Sensing Accuracy Range | ± 1°C |
| Sensing Accuracy Range | ± 1°C |
| Measured Temperature Min | -55°C |
| Measured Temperature Max | 150°C |
| Sensor Case / Package | Flatpack |
| Supply Voltage Min | 4V |
| No. of Channels | - |
| Output Interface | - |
| Operating Temperature Max | 150°C |
| Qualification | - |
| SVHC | Lead (23-Jan-2024) |
| Sensor Output Type | Analogue |
|---|---|
| Accuracy | ± 1°C |
| Sensing Temperature Min | -55°C |
| Sensing Temperature Max | 150°C |
| Sensor Case Style | Flatpack |
| No. of Pins | 2Pins |
| Supply Voltage Max | 30V |
| Resolution | - |
| Operating Temperature Min | -55°C |
| Product Range | - |
| Automotive Qualification Standard | - |
Technical Docs (2)
Legislation and Environmental
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| RoHS Compliant: | No |
| RoHS Phthalates Compliant: | No |
| SVHC: | Lead (23-Jan-2024) |
| Download Product Compliance Certificate | Product Compliance Certificate |
