
| Manufacturer | ALLEGRO MICROSYSTEMS |
|---|---|
| Manufacturer Part No | ACS712ELCTR-30A-TCopy |
| Manufacturer Standard Lead Time | 33 weeks |
| Newark Part No. | Re-Reel83R7949RL Cut Tape83R7949 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Packaging Type | Quantity | Unit Price: | Total |
|---|---|---|---|
| Cut Tape | 1 | $3.770 | $3.77 |
| Total Price | $3.77 | ||
| Quantity | Price |
|---|---|
| 1+ | $3.770 |
| 50+ | $2.930 |
| 100+ | $2.820 |
| 250+ | $2.710 |
| 500+ | $2.590 |
| 1000+ | $2.510 |
| 2500+ | $2.460 |
| 5000+ | $2.410 |
Product Information
| Manufacturer | ALLEGRO MICROSYSTEMS |
|---|---|
| Manufacturer Part No | ACS712ELCTR-30A-TCopy |
| Manufacturer Standard Lead Time | 33 weeks |
| Newark Part No. | Re-Reel83R7949RL Cut Tape83R7949 |
| Technical Datasheet | |
| Current Sensor Type | Hall Effect |
| Quiescent Current | 10mA |
| Current Sense Direction | Unidirectional, Bidirectional |
| Bandwidth | 80kHz |
| Accuracy | ± 1.5% |
| Measured Current | 10mA |
| Measured Current | AC / DC |
| Sensor Case Style | SOIC |
| Sensor Case / Package | SOIC |
| No. of Pins | 8Pins |
| Supply Voltage Min | 4.5V |
| Supply Voltage Max | 5.5V |
| Isolation Voltage | 2.1kVrms |
| Output Interface | Ratiometric |
| Sensor IC Mounting | Surface Mount |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 85°C |
| Product Range | - |
| Qualification | - |
| MSL | - |
| SVHC | To Be Advised |
Product Overview
ACS712ELCTR-30A-T is an Allegro™ fully integrated, hall-effect-based linear current sensor IC with a low-resistance current conductor. It provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch mode power supplies, and overcurrent fault protection. It is not intended for automotive applications. It consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer.
- Current sensing range is ±30A
- Frequency bandwidth is 80KHz typ (-3dB, TA = 25°C, IP is 10A peak-to-peak)
- Supply voltage range from 4.5 to 5.5V (TA, CF = 1nF, and VCC = 5V)
- Primary conductor resistance is 1.20mohm typ (TA = 25°C)
- Low-noise analog signal path, device bandwidth is set via the new FILTER pin
- 5µs output rise time in response to step input current, current sensing is ±30A
- Extremely stable output offset voltage, nearly zero magnetic hysteresis
- Ratiometric output from supply voltage
- Output voltage proportional to AC or DC currents, factory-trimmed for accuracy
- 8 pin SOIC package, operating temperature range from -40 to 85°C
Technical Specifications
| Current Sensor Type | Hall Effect |
|---|---|
| Current Sense Direction | Unidirectional, Bidirectional |
| Accuracy | ± 1.5% |
| Measured Current | AC / DC |
| Sensor Case / Package | SOIC |
| Supply Voltage Min | 4.5V |
| Isolation Voltage | 2.1kVrms |
| Sensor IC Mounting | Surface Mount |
| Operating Temperature Max | 85°C |
| Qualification | - |
| SVHC | To Be Advised |
| Quiescent Current | 10mA |
|---|---|
| Bandwidth | 80kHz |
| Measured Current | 10mA |
| Sensor Case Style | SOIC |
| No. of Pins | 8Pins |
| Supply Voltage Max | 5.5V |
| Output Interface | Ratiometric |
| Operating Temperature Min | -40°C |
| Product Range | - |
| MSL | - |
Technical Docs (2)
Associated Products
3 Products Found
Legislation and Environmental
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | To Be Advised |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Proposition 65 |
