
| Manufacturer | ALLEGRO MICROSYSTEMS |
|---|---|
| Manufacturer Part No | A1220LLHLX-TCopy |
| Manufacturer Standard Lead Time | 18 weeks |
| Newark Part No. | Re-Reel49AC3219RL Cut Tape49AC3219 |
| Your Part Number | |
| Technical Datasheet |
Need more?
| Packaging Type | Quantity | Unit Price: | Total |
|---|---|---|---|
| Cut Tape | 1 | $1.010 | $1.01 |
| Total Price | $1.01 | ||
| Quantity | Price |
|---|---|
| 1+ | $1.010 |
| 50+ | $0.761 |
| 100+ | $0.728 |
| 250+ | $0.695 |
| 500+ | $0.661 |
| 1000+ | $0.637 |
| 2500+ | $0.612 |
| 5000+ | $0.587 |
Product Information
| Manufacturer | ALLEGRO MICROSYSTEMS |
|---|---|
| Manufacturer Part No | A1220LLHLX-TCopy |
| Manufacturer Standard Lead Time | 18 weeks |
| Newark Part No. | Re-Reel49AC3219RL Cut Tape49AC3219 |
| Technical Datasheet | |
| Switch Type | Hall Effect Latch |
| Hall Effect Type | Latching |
| Operating Point Typ | 22G |
| Release Point Typ | -23G |
| Hysteresis Typ | - |
| Supply Voltage Min | 3V |
| Supply Voltage Max | 24V |
| Sensor Case Style | SOT-23W |
| Sensor Case / Package | SOT-23W |
| No. of Pins | 3 Pin |
| Sensor Output Type | Voltage |
| No. of Outputs | 1Outputs |
| Output Interface | - |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 150°C |
| Product Range | - |
| Automotive Qualification Standard | AEC-Q100 |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (17-Jan-2022) |
Product Overview
A1220LLHLX-T is a chopper-stabilized precision hall-effect latch sensor IC. it is extremely temperature-stable and stress-resistant device especially suited for operation over extended temperature ranges to 150°C. Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress. It includes on a single silicon chip a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short-circuit protected open-drain output to sink up to 25mA. A south pole of sufficient strength turns the output on. A north pole of sufficient strength is necessary to turn the output off. Typical application includes power closures/actuators, electronic power steering, seat/windows/sunroof motors, trunk/door/liftgate motors, industrial motor/encoders, commutation/index sensing, BLDC motors and fan motors.
- Voltage output, 1D planar type
- Supply voltage range from 3 to 24V
- AEC-Q100 automotive qualified
- Quality managed (QM), symmetrical latch switch points
- Resistant to physical stress, superior temperature stability
- Output short-circuit protection, reverse-battery protection
- Operation from unregulated supply down to 3V
- Solid-state reliability
- Operating temperature range from -40 to 150°C
- 3 pin SOT23W package
Technical Specifications
| Switch Type | Hall Effect Latch |
|---|---|
| Operating Point Typ | 22G |
| Hysteresis Typ | - |
| Supply Voltage Max | 24V |
| Sensor Case / Package | SOT-23W |
| Sensor Output Type | Voltage |
| Output Interface | - |
| Operating Temperature Max | 150°C |
| Automotive Qualification Standard | AEC-Q100 |
| SVHC | No SVHC (17-Jan-2022) |
| Hall Effect Type | Latching |
|---|---|
| Release Point Typ | -23G |
| Supply Voltage Min | 3V |
| Sensor Case Style | SOT-23W |
| No. of Pins | 3 Pin |
| No. of Outputs | 1Outputs |
| Operating Temperature Min | -40°C |
| Product Range | - |
| MSL | MSL 1 - Unlimited |
Technical Docs (1)
Legislation and Environmental
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (17-Jan-2022) |
| Download Product Compliance Certificate | Product Compliance Certificate |
