STM32F207VGT6

STM32F207VGT6 is a general-purpose, ARM-based 32bit microcontroller. It features an adaptive real-time memory accelerator (ART Accelerator™) that allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120MHz. This performance has been validated using the CoreMark® benchmark. It offers three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32bit timers. a true number random generator (RNG). It also features standard and advanced communication interfaces. Applications include motor drive and application control, medical equipment, industrial applications: PLC, inverters, circuit breakers, printers, and scanners, alarm systems, video intercom, and HVAC, home audio appliances.

• 4 to 26MHz crystal oscillator, internal 16MHz factory-trimmed RC
• VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4Kb backup SRAM
• General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
• Debug mode: Serial wire debug (SWD), JTAG, and Cortex®-M3 Embedded Trace Macrocell™
• USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
• 8- to 14-bit parallel camera interface (48 Mbyte/s max.), CRC calculation unit
• 1024Kbytes of flash memory size, connectivity, camera interface, ethernet
• Industrial temperature range from -40°C to 85°C
• 100-pin LQFP package