MAX3394EETA+T

The MAX3394EETA+T is a ±15kV ESD protected, high drive current , dual level translator with speed-up circuitry in 8 pin TDFN package. This device has an internal slew-rate enhancement circuitry featuring 10mA current-sink and 15mA current-source drivers to isolate capacitive loads from lower current drivers. In open-drain systems, slew rate enhancement enables fast data rates with larger pull-up resistors and increased bus load capacitance. The level translator operates in tri-state output mode with thermal-shutdown protection and ±15kV Human Body Model (HBM) ESD protection on the VCC side for greater protection. It is ideally used for data transfer between low voltage ASIC/PLDs and higher voltage systems.

• Supply voltage range is 1.65V to 5.5V
• Operating temperature range from -40°C to 85°C
• Bidirectional level translation without direction pin
• Slew-rate enhancement circuitry supports larger capacitive loads/larger external pull-up resistors
• Low supply current in tri-state output mode (3µA typ)
• Thermal-shutdown protection
• Data rate of 6Mbps with push-pull driver and 1Mbps with open-drain driver
• High-impedance state of the I/O lines during tri-state output mode

Applications

Communications & Networking, Portable Devices

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party