PL1S002000101

The PL1S002000101 is a USB 2.0 (ULPI/OTG) snap on board which is designed to provide connectivity between USB 2.0 host/OTG controller and USB 2.0 device IP core. The snap on board provides a fast, versatile and easy to use communication path for data exchange between the device and host. The board provides complete high speed USB 2.0 physical front end solution that supports high speed (480Mbit/s), full speed (12Mbit/s) and low speed (1.5Mbit/s). This board works seamlessly with the USB 2.0 IP cores including USB 2.0 device with Avalon interface-ULPI support (USB20HR), USB 2.0 device with FIFO interface-ULPI support (USB20HF)ƒ and USB 2.0 host controller (USB20HC).

• Operates in low speed (1.5Mbps), full speed (12Mbps) ƒƒand high speed (480Mbps)
• ULPI PHY Chip - NXP ISP1504
• Serial to parallel and parallel to serial conversionƒ
• Provides 8bit bidirectional data interfaceƒ
• A current limited external VBUS power switch with thermal shutdown
• USB mini AB type connector and one power LED and one user LED
• Standard santacruz interface and GPIO interface support
• Fully complies with universal serial bus specification revision 2.0
• On the go supplement to the USB 2.0 specification revision 1.2
• UTMI and low pin interface (ULPI) specification revision 1.1

Aplicações

Communications & Networking

Conteúdo

USB 2.0 ULPI snap on board, USB 2.0 ULPI cable, CD ROM containing USB20HR IP core (USB 2.0 device controller - Avalon interface) evaluation version, USB20HF IP core (USB 2.0 device controller - FIFO interface) evaluation version, USB20HC IP core (USB 2.0 host controller) evaluation version and Board reference manual.