
| Fabricante | NXP |
|---|---|
| No. Parte Fabricante | FRDM-KL26ZCopiar |
| Tiempo de entrega estándar del fabricante | 17 semanas |
| No. Parte Newark | 87W8001 |
| Su número de pieza | |
| Hoja de datos técnicos |
10 Puede reservar stock ahora
| Cantidad | Precio |
|---|---|
| 1+ | $32.090 |
Información del producto
| Fabricante | NXP |
|---|---|
| No. Parte Fabricante | FRDM-KL26ZCopiar |
| Tiempo de entrega estándar del fabricante | 17 semanas |
| No. Parte Newark | 87W8001 |
| Hoja de datos técnicos | |
| Circuito Integrado, Fabricante | NXP |
| No. de Puntas | 32bit |
| Nombre de la Familia del Silicio | Kinetis - KL2 |
| Núcleo, Arquitectura | ARM |
| Núcleo, Subarquitectura | Cortex-M0+ |
| Núcleo de Silicio, Numeración | KL26Z |
| Kit, Contenido | Dev Board KL26Z |
| Rango de Producto | - |
| Sustancia Extremadamente Preocupante (SVHC) | No SVHC (27-Jun-2024) |
Resumen del producto
The FRDM-KL26Z is a freedom development platform for Kinetis MKL26Z128VLH4 microcontroller. The freedom development platform is a set of software and hardware tools for evaluation and development. It’s ideal for the rapid prototyping of microcontroller based applications. The freedom KL26Z hardware (FRDM-KL26Z) is a capable and cost effective design featuring a Kinetis L series microcontroller, the industry’s first microcontroller built on the ARM Cortex-M0+ core. The FFRDM-KL26Z can be used to evaluate the KL16 and KL26 Kinetis L series devices. It features a KL26Z128VLH4, a device boasting a maximum operating frequency of 48MHz, 128KB of flash, a full speed USB controller and numerous analogue and digital peripherals. This board features the open standard embedded serial and debug adapter known as OpenSDA. The OpenSDA is an open standard serial and debug adapter. It bridges serial and debug communications between a USB host and an embedded target processor.
- Capacitive touch slider, FXOS8700CQ magnetometer and accelerometer, tricolor LED
- Easy access to microcontroller I/O
- Sophisticated OpenSDA debug interface
- Mass storage device flash programming interface (default)
- P&E multilink interface provides run control debugging and compatibility with IDE tools
- OpenSDA debug interface
- Battery ready, power measurement access points
- Form factor compatible with Arduino R3 pin layout
- Flexible power supply options, USB, coin cell battery, external source
- No tool installation required to evaluate demo applications
Aplicaciones
Electrónica de Consumo, Administración de Potencia, Comunicaciones y Red, Audio
Contenido
FRDM-KL26Z freedom board, Quick reference card.
Notas
The OpenSDA circuit is operational only when a USB cable is connected and is supplying power to OpenSDA USB connector.
Especificaciones técnicas
| Circuito Integrado, Fabricante | NXP |
|---|---|
| Nombre de la Familia del Silicio | Kinetis - KL2 |
| Núcleo, Subarquitectura | Cortex-M0+ |
| Kit, Contenido | Dev Board KL26Z |
| Sustancia Extremadamente Preocupante (SVHC) | No SVHC (27-Jun-2024) |
| No. de Puntas | 32bit |
|---|---|
| Núcleo, Arquitectura | ARM |
| Núcleo de Silicio, Numeración | KL26Z |
| Rango de Producto | - |
Documentos técnicos (4)
Alternativas para el número de pieza FRDM-KL26Z
5 productos encontrados
Productos relacionados
4 productos encontrados
Legislación y medioambiente
| US ECCN: | EAR99 |
|---|---|
| EU ECCN: | Unknown |
| Conforme a RoHS: | Sí RoHS |
| Cumplimiento de ftalatos con respecto a la restricción de sustancias peligrosas (RoHS): | Sí RoHS |
| Valor de sustancia extremadamente preocupante: | No SVHC (27-Jun-2024) |
| Descargue el certificado de cumplimiento del producto | Certificado de conformidad del producto |
