23LC1024-I/ST

The 23LC1024-I/ST is a 1Mb SPI Serial SRAM with SDI and SQI interface. The memory is accessed via a simple serial peripheral interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input. Additionally, SDI (serial dual interface) and SQI (serial quad interface) is supported if application needs faster data rates. This device also supports unlimited reads and writes to the memory array. It may also interface with microcontrollers that do not have a built-in SPI port by using discrete I/O lines programmed properly in firmware to match the SPI protocol.

• SPI-compatible bus interface - 20MHz clock rate, SPI/SDI/SQI mode
• Low-power CMOS technology
• 3mA at 5.5V, 20MHz Read current
• 4µA at +85°C Standby current
• Unlimited read and write cycles
• Zero write time
• 32-byte page
• Byte, page and sequential mode for reads and writes
• High reliability
• -40 to +85°C Temperature range

Aplicaciones

Comunicaciones y Red, Audio, Inalámbrico, Calibración, Automoción

Advertencias

ESD sensitive device, take proper precaution while handling the device.