You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
L293DNE
Motor Driver/Controller, Half-H, 4.5V to 36V supply, 36V/600 mA/4 Outputs, DIP-16
- Manufacturer:
- TEXAS INSTRUMENTS TEXAS INSTRUMENTS
- Manufacturer Part No:
- L293DNE
- Newark Part No.:
- 06F9523
Alternatives for L293DNE
Product Overview
The L293DNE is a quadruple high current half-H driver. The L293DNE is designed to provide bidirectional drive currents of up to 600mA at voltages from 4.5V to 36V. The device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high current/high voltage loads in positive supply applications. All inputs are TTL compatible. Each output is a complete totem pole drive circuit, with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled and their outputs are off and in the high impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.
- Separate Input logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High noise immunity inputs
- Output current 600mA per channel
- Output clamp diodes for inductive transient suppression
Applications
Industrial, Motor Drive & Control, Power Management
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- Half-H
- :
- 4Outputs
- :
- 600mA
- :
- 36V
- :
- DIP
- :
- 16Pins
- :
- 4.5V
- :
- 36V
- :
- 0°C
- :
- 70°C
- :
- -
- :
- -
Technical Documents (0)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
US continental orders over $49 and under 50 pounds may qualify for free ground shipping. Click the link for the full Terms and Conditions of the offer.
No Longer Available
$2.22
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 25 Minimum: 200
| Quantity | Price | Your Price |
|---|---|---|
| 100+ | $2.22 | |
| 250+ | $1.86 | |
| 500+ | $1.81 | |
Pricing is unavailable. Please contact customer services.
Filter Tool