Low

4DPI-24-HAT - 

HAT Primary Display, 2.4", Raspberry Pi

The actual product may differ from image shown

Manufacturer Part No:
4DPI-24-HAT
Newark Part No.:
49Y1710
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-
:
-
:
-
:
-
:
-
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The 4DPI-24-HAT is a 2.4-inch 320 x 240 Primary Display HAT for the Raspberry Pi, which plugs directly on top of a Raspberry Pi and displays the primary output which is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel, enabling the 4DPi-24-HAT to function with the Raspberry Pi without the need for a mouse. Communication between the 4DPi-24-HAT and the Raspberry Pi is interfaced with a high speed 48MHz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression and features a customised DMA enabled kernel. It is designed to work with the Raspbian operating system running on the Raspberry Pi, as that is the official Raspberry Pi operating system. The 4DPi-24-HAT is powered directly off the Raspberry Pi's 40 way Header and the 2.4" touch screen allows effortless interaction with the Raspbian operating system.
  • Universal 2.4" primary display for the Raspberry Pi
  • Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2
  • 320 x 240 QVGA Resolution, RGB 65K true to life colours
  • TFT screen with integrated 4-wire resistive touch panel
  • Display full GUI output/primary output, just like a monitor connected to the Raspberry Pi
  • Powered directly off the Raspberry Pi, no external power supply is required
  • 25FPS Typical frame rate, higher if image is able to be compressed by Kernel
  • On/Off or PWM controlled backlight, selectable by on board jumper
  • On board identification EEPROM

Applications

Embedded Design & Development

Associated Products

Compare Selected