Low

TRIPP-LITE  PV1250FC  DC/AC Inverter, PowerVerter, 2 Output, 12 VDC, 1.25 kW, 120 VAC, 228.6 mm, 222.25 mm

TRIPP-LITE PV1250FC

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The PV1250FC is a 2-output PowerVerter Plus Industrial-strength Inverter allows users to run large, motorized AC appliances from any 12V battery or automotive DC system. Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. It continuously supplies up to 1250 watts of 120VAC power to (2) AC outlets from any 12VDC battery source. Frequency control locks AC output at 60Hz for operating stability of motor loads and other inductive loads with high current startup requirements. Diagnostic LEDs indicate load level (high, medium and low) and battery charge (high, medium and low).
  • Converts 12VDC battery power to 120VAC power
  • High efficiency power conversion
  • Automatic overload protection
  • 2 outlets, DC input terminals for 12V battery connection
  • Frequency control for operating stability
  • High-efficiency operation conserves batteries to prolong run time
  • DC fusing protects inverter against overload
  • RJ45 port allows connection of APS/PowerVerter remote switch(APSRM4)
  • Ignition interlock jack

Applications

Power Management; Automotive

Contents

PV1250FC Inverter and Instruction manual.
To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18" from the PV1250FC's battery in the positive line.

Customers Also bought

Product Information

No. of Outputs:
2 Output
Input Voltage Max:
12VDC
Output Power:
1.25kW
Output Voltage:
120VAC
Length:
228.6mm
Width:
222.25mm
Height:
177.8mm
Product Range:
-
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Legislation and Environmental

Applications

  • Power Management;
  • Automotive

Contents

PV1250FC Inverter and Instruction manual.

Notes

To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18" from the PV1250FC's battery in the positive line.

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Recently Viewed

Product Recommendations