TEXMATE  SM-35  Voltmeter, LED, SM-35 series, DC Voltage, ±2VDC / ±20VDC / ±200VDC, 3.5 Digits, 4.5 Vdc to 5.5 Vdc

Technical Data Sheet (301.97KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The SM-35 is a 3-1/2-digit Multi-range Panel Meter with LED displays and offer many unique features designed to simplify installation, calibration and scaling. This meter is pin-compatible, which enables LED meter to be interchanged within the same panel without necessitating wiring or panel cut-out changes. It is powered with bipolar single-ended inputs. The meter features display hold, display test and auto-polarity indication. The polarity indication may be disabled or reversed by repositioning jumper clips on internal header pins. The SM-series of meter is designed to be user scalable to almost any engineering unit of readout. On-site scaling and recalibration is facilitated by multi-turn potentiometers that provide continuous fine and coarse adjustment within each of the three header-programmable full scale ranges.
  • PCB edge connector
  • 1MΩ Minimum input impedance
  • 12-bit Dual slope A/D converter
  • 1min Specified accuracy warm-up time
  • 3 Readings/sec conversion rate
  • 0 to 60˚C Operating temperature range


Product Information

No. of Digits / Alpha:
Meter Function:
DC Voltage
Meter Range:
±2VDC / ±20VDC / ±200VDC
Digit Height:
Panel Cutout Height:
Panel Cutout Width:
Supply Voltage Min:
Supply Voltage Max:
Operating Temperature Min:
Operating Temperature Max:
Product Range:
To Be Advised

Find similar products  grouped by common attribute


  • Industrial;
  • Metering

Legislation and Environmental

Independent Distributor

Associated Products

Similar Products