Low

TXS0102DCUR - 

Voltage Level Translator, 2 Input, 1 A, 165 ns, 24 Mbps, 1.65 V to 5.5 V, VSSOP-8

TEXAS INSTRUMENTS TXS0102DCUR

The actual product may differ from image shown

Manufacturer Part No:
TXS0102DCUR
Newark Part No.:
30M1878
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-
:
-40°C
:
VSSOP
:
-
:
Cut Tape
:
Level Translator
:
85°C
:
165ns
:
8Pins
:
1.65V
:
2
:
-
:
5.5V
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The TXS0102DCUR is a two-bit non-inverting Translator IC, bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 to 3.6V while it tracks the VCCA supply and the B ports supporting operating voltages from 2.3 to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
  • No Direction-Control Signal Needed
  • 24Mbps (Push Pull) and 2Mbps (Open Drain) Maximum Data Rates
  • 1.65 to 3.6V on A port and 2.3 to 5.5V on B port (VCCA≤VCCB)
  • VCC Isolation Feature - If Either VCC Input Is at GND, Both Ports Are in the High-impedance State
  • No Power-supply Sequencing Required: Either VCCA or VCCB can be Ramped First
  • Ioff Supports Partial-power-down Mode Operation
  • Latch-up Performance Exceeds 100mA Per JESD 78, Class II
  • Green Product, No Sb/Br

Applications

Communications & Networking, Signal Processing

Warnings

Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Substitutes

Compare Selected
Manufacturer Part Number
Newark Part No.
Manufacturer / Description
Avail
Price For
Quantity

TEXAS INSTRUMENTS

Voltage Level Translator, 2 Input, 1 A, 165 ns, 24 Mbps, 1.65 V to 5.5 V, VSSOP-8

6,000 in stock
Add

TEXAS INSTRUMENTS

Voltage Level Translator, 2 Input, 50 mA, 165 ns, 1.65 V to 3.6 V, VSSOP-8

500 in stock
Add

TEXAS INSTRUMENTS

Voltage Level Translator, 2 Input, 50 mA, 165 ns, 1.65 V to 3.6 V, VSSOP-8

250 in stock

Each (Supplied on Cut Tape)

1+ $0.851 10+ $0.753 25+ $0.723 100+ $0.577

Add
0

Each (Supplied on Full Reel)

1250+ $0.372 2000+ $0.308 5000+ $0.306 10000+ $0.297

Add

Associated Products

Compare Selected