Low

TEXAS INSTRUMENTS  TXS0102DCUR  Voltage Level Translator, 2 Input, 1 A, 165 ns, 24 Mbps, 1.65 V to 5.5 V, VSSOP-8

TEXAS INSTRUMENTS TXS0102DCUR
Manufacturer Part No:
TXS0102DCUR
Newark Part No.:
30M1878
Technical Datasheet:
See all Technical Docs

The actual product may differ from image shown

Product Overview

The TXS0102DCUR is a two-bit non-inverting Translator IC, bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 to 3.6V while it tracks the VCCA supply and the B ports supporting operating voltages from 2.3 to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
  • No Direction-Control Signal Needed
  • 24Mbps (Push Pull) and 2Mbps (Open Drain) Maximum Data Rates
  • 1.65 to 3.6V on A port and 2.3 to 5.5V on B port (VCCA≤VCCB)
  • VCC Isolation Feature - If Either VCC Input Is at GND, Both Ports Are in the High-impedance State
  • No Power-supply Sequencing Required: Either VCCA or VCCB can be Ramped First
  • Ioff Supports Partial-power-down Mode Operation
  • Latch-up Performance Exceeds 100mA Per JESD 78, Class II
  • Green Product, No Sb/Br
Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Product Information

No. of Inputs:
2
Output Current:
-
Propagation Delay:
165ns
No. of Pins:
8Pins
Logic Case Style:
VSSOP
Supply Voltage Min:
1.65V
Supply Voltage Max:
5.5V
Operating Temperature Min:
-40°C
Operating Temperature Max:
85°C
Logic Type:
Level Translator
Packaging:
Cut Tape
Product Range:
-
Automotive Qualifications Standard:
-
MSL:
MSL 1 - Unlimited
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Applications

  • Communications & Networking
  • Signal Processing

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Substitutes

Voltage Level Translator, 2 Input, 1 A, 165 ns, 24 Mbps, 1.65 V to 5.5 V, VSSOP-8

TEXAS INSTRUMENTS

6,000 in stock

Price for: Each (Supplied on Full Reel)

3000+ $0.268 9000+ $0.256 24000+ $0.248

Buy

Voltage Level Translator, 2 Input, 50 mA, 165 ns, 1.65 V to 3.6 V, VSSOP-8

TEXAS INSTRUMENTS

500 in stock

Price for: Each (Supplied on Full Reel)

250+ $0.285 Promotional price 500+ $0.285 Promotional price 1000+ $0.285 Promotional price 1500+ $0.285 Promotional price More pricing

Buy

Voltage Level Translator, 2 Input, 50 mA, 165 ns, 1.65 V to 3.6 V, VSSOP-8

TEXAS INSTRUMENTS

250 in stock

Price for: Each (Supplied on Cut Tape)

1+ $1.01 10+ $0.838 100+ $0.552

Buy

Translator, 1.65 V to 5.5 V, VSSOP-8

TEXAS INSTRUMENTS

0

Price for: Each (Supplied on Full Reel)

3000+ $0.268 9000+ $0.256 24000+ $0.248

Buy

Translator, 1.65 V to 5.5 V, VSSOP-8

TEXAS INSTRUMENTS

0

Price for: Each (Supplied on Full Reel)

1250+ $0.372 2000+ $0.308 5000+ $0.306 10000+ $0.297

Buy

Associated Products