Low

TPS74401EVM-118 - 

Evaluation Board, Adjustable 3A LDO Voltage Regulator Soft Start Time Set By External Capacitor

TEXAS INSTRUMENTS TPS74401EVM-118

The actual product may differ from image shown

Manufacturer Part No:
TPS74401EVM-118
Newark Part No.:
10M0663

Product Information

:
TPS74401
:
Evaluation Board TPS74401
:
Low Dropout Linear Regulator
:
-
:
Texas Instruments
:
Power Management
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The TPS74401EVM-118 is an evaluation module designed to help the user easily evaluate and test the operation and functionality of the TPS74401 LDO linear regulator. This regulator require a low power bias voltage, VBIAS, and a power input voltage, VIN. The TPS74401 is capable of providing output voltages down to 0.8V and have an integrated supervisory circuit with open drain output that goes to high impedance when the output voltage reaches regulation (power good or PG). The TPS74401 can provide up to 1.5A and 3.0A dc current, respectively, and have a SS pin which allows the user to set the output voltage's linear ramp rate. The goal of the evaluation module is to facilitate evaluation of the TPS74x01 ICs.
  • Supports input voltages as low as 0.9V with external bias supply due to ultra low dropout
  • Adjustable output (0.8V to 3.6V) up to 3A
  • Soft start time set by external capacitor
  • Stable with any or no output capacitor
  • 1% accuracy over line, load and temperature
  • Open drain power good (PG)
  • 5mm x 5mm x 1mm QFN package

Applications

Power Management, Signal Processing, Embedded Design & Development

Warnings

It is important to operate this EVM within the input voltage of 5V and the output voltage of 3.3V. Exceeding the specified input range may cause unexpected operation or irreversible damage to the EVM.

Associated Products

Compare Selected