Low

OPA698ID - 

Limiting Amplifier, 450 MHz, -5 V, 5 V, SOIC, 8 Pins, -40 °C

TEXAS INSTRUMENTS OPA698ID

The actual product may differ from image shown

Manufacturer Part No:
OPA698ID
Newark Part No.:
87H2080
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
-40°C
:
Each
:
85°C
:
8Pins
:
SOIC
:
-5V
:
-
:
5V
:
450MHz
:
MSL 4 - 72 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The OPA698ID is an unity-gain stable wideband voltage Limiting Amplifier offers bipolar output voltage limiting. Two buffered limiting voltages take control of the output when it attempts to drive beyond these limits. This new output limiting architecture holds the limiter offset error to ±10mV. The op-amp operates linearly to within 20mV of the output limit voltages. The combination of a narrow nonlinear range and the low limiting offset allows the limiting voltages to be set within 100mV of the desired linear output range. A fast 1ns recovery from limiting ensures that overdrive signals will be transparent to the signal channel. Implementing the limiting function at the output, as opposed to the input, gives the specified limiting accuracy for any gain and allows the OPA698 to be used in all standard op-amp applications. Nonlinear analog signal processing will benefit from the ability of the OPA698 to sharply transition from linear operation to output limiting.
  • High linearity near limiting
  • 1ns Fast recovery from overdrive
  • ±10mV Limiting voltage accuracy
  • 1100V/µs Slew rate
  • Green product and no Sb/Br

Applications

Signal Processing, Industrial

Substitutes

Associated Products

Compare Selected