Low

TEXAS INSTRUMENTS  OPA541AP  Operational Amplifier, Single, 1.6 MHz, 1 Amplifier, 10 V/µs, 20V to 70V, TO-220, 11 Pins

TEXAS INSTRUMENTS OPA541AP
Technical Data Sheet (454.33KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The OPA541AP is a high power, monolithic FET input operational amplifier in 11 pin TO-220 package. Internal current limit circuitry can be user programmed with single external resistor protecting amplifier and load from fault conditions. The OPA541 is fabricated using a proprietary bipolar/FET process. It uses single current limit resistor to set both positive and negative current limits. Applications currently using hybrid power amplifiers requiring two current limit resistors need not be modified.
  • Capable of operation from power supplies up to ±40V
  • Continuous current of 5A and peak current of 10A
  • Programmable current limit
  • Gain bandwidth product of 1.6MHz
  • Slew rate of 10V/μs
  • Input offset voltage of ±2mV
  • Input bias current of 4pA
  • Common mode rejection of 113dB
  • Power supply voltage from ±10V to ±35V
  • Operating temperature range from -25°C to 85°C
This integrated circuit can be damaged by ESD. Failure to observe proper handling and installation procedures can cause damage.

 

Product Information

Bandwidth:
1.6MHz
No. of Amplifiers:
No. of Amplifiers:
1 Amplifier
Slew Rate:
10V/µs
Supply Voltage Range:
20V to 70V
Amplifier Case Style:
TO-220
No. of Pins:
11Pins
Operating Temperature Min:
-25°C
Operating Temperature Max:
85°C
Packaging:
Each
Product Range:
-
Automotive Qualifications Standard:
-
Op Amp Type:
High Current
MSL:
-
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Applications

  • Signal Processing;
  • Motor Drive & Control;
  • Audio

Legislation and Environmental

Moisture Sensitivity Level:
-
RoHS Compliant:
Yes
Authorized Distributor

Substitutes

Associated Products

Similar Products