Low

TEXAS INSTRUMENTS  MSP430FR5739IDAR  16 Bit Microcontroller, Mixed Signal, MSP430, 24 MHz, 16 KB, 1 KB, 38 Pins, TSSOP

TEXAS INSTRUMENTS MSP430FR5739IDAR
Technical Data Sheet (8.19KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The MSP430FR5739IDAR is a 16-bit ultra-low-power Mixed-signal Microcontroller features an embedded FRAM non-volatile memory, powerful 16-bit RISC MSP430 CPU and different peripherals. The architecture showcases seven low-power modes, which are optimized to achieve extended battery life. FRAM is a new non-volatile memory that combines the speed, flexibility and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption. The device configurations with five 16-bit timers, 10-bit A/D converter, a 16-channel comparator with voltage reference generation and hysteresis capabilities, three enhanced serial channels capable of I2C, SPI or UART protocols, a hardware multiplier and 32 general-purpose I/O pins. This device operates at a maximum frequency of 24MHz.
  • Ultra-low-power ferroelectric RAM (FRAM)
  • 32-bit Hardware multiplier (MPY)
  • 3-channel internal DMA
  • Real-time clock (RTC) with calendar and alarm functions
  • Five 16-bit timers with up to 3 Capture/Compare registers
  • 16-bit Cyclic redundancy checker (CRC)
  • 16-channel analog comparator with voltage reference and programmable hysteresis
  • 14-channel 10-bit ADC with internal reference and sample-and-hold
  • UART with automatic baud-rate detection
  • IrDA Encoder and decoder
  • SPI at rates up to 10Mbps
  • I2C with multiple-slave addressing
  • Hardware UART bootloader (BSL)
  • Fully integrated LDO
  • Supply voltage supervisor for core and supply voltages with reset capability
  • Always-on zero-power brownout detection
  • Serial on-board programming with no external voltage needed
  • Fixed-frequency DCO with six selectable factory-trimmed frequencies
  • Low-power low-frequency internal clock source (VLO)
  • 32kHz Crystals (LFXT)
These products use FRAM non-volatile memory technology. FRAM retention is sensitive to extreme temperatures, such as those experienced during reflow or hand soldering.

 

Product Information

Controller Family/Series:
MSP430
CPU Speed:
24MHz
Program Memory Size:
16KB
RAM Memory Size:
1KB
No. of Pins:
38Pins
MCU Case Style:
TSSOP
No. of I/O's:
30I/O's
Embedded Interface Type:
I2C, SPI, UART
Supply Voltage Min:
2V
Supply Voltage Max:
3.6V
Packaging:
Cut Tape
Product Range:
-
MPU Core Size:
16bit
MSL:
MSL 2 - 1 year
Peripherals:
ADC, Comparator, PWM, Timer
Operating Temperature Min:
-40 °C
Operating Temperature Max:
85 °C
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Applications

  • Portable Devices;
  • Wireless;
  • Sensing & Instrumentation;
  • Building Automation;
  • Security

Legislation and Environmental

Moisture Sensitivity Level:
MSL 2 - 1 year
Product Traceability
RoHS Compliant:
Yes

Substitutes

Associated Products

Similar Products