LM1881M/NOPB - TEXAS INSTRUMENTS - VIDEO SYNCHRONOUS SEPARATOR, 12V, 8-SOIC

Add to compare

The actual product may differ from image shown

Manufacturer:: TEXAS INSTRUMENTS TEXAS INSTRUMENTS
Manufacturer Part No:: LM1881M/NOPB
Newark Part No.:: 41K3530
Technical Datasheet:: (EN)

See all Technical Docs

Product Information

Operating Temperature Min:: 0°C
Packaging:: Each
Operating Temperature Max:: 70°C
No. of Pins:: 8Pins
Supply Voltage Min:: 5V
Output Synch Type:: Composite, Vertical
Product Range:: -
Supply Voltage Max:: 12V
TV / Video Case Style:: SOIC
MSL:: MSL 1 - Unlimited

Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LM1881M/NOPB is a video Sync Separator extracts timing information including composite and vertical sync, burst or back porch timing and odd and even field information from standard negative going sync NTSC, PAL and SECAM video signals with amplitude from 0.5V to 2Vp-p. The integrated circuit is also capable of providing sync separation for non-standard, faster horizontal rate video signals. The vertical output is produced on the rising edge of the first serration in the vertical sync period. A default vertical output is produced after a time delay if the rising edge mentioned above does not occur within the externally set delay period, such as might be the case for a non-standard video signal.

AC Coupled composite input signal
>10kΩ Input resistance
<10mA Power supply drain current
Composite sync and vertical outputs
Odd and even field output
Burst gate or back porch output
150kHz Horizontal scan rate
Edge triggered vertical output
Default triggered vertical output for non-standard video signal
Green product and no Sb/Br

Applications

Imaging, Video & Vision, Consumer Electronics, Computers & Computer Peripherals

Warnings

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.