Low

DS90LV011ATMF/NOPB - 

LVDS Driver, Single High Speed, LVDS Differential Line Driver, 1.2 ns, 10 mA, -40 °C, 85 °C, 3 V

TEXAS INSTRUMENTS DS90LV011ATMF/NOPB

The actual product may differ from image shown

Manufacturer Part No:
DS90LV011ATMF/NOPB
Newark Part No.:
41K2063
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
1.2ns
:
10mA
:
LVDS
:
-40°C
:
-
:
Cut Tape
:
LVTTL
:
85°C
:
SOT-23
:
400Mbps
:
5Pins
:
3V
:
-
:
9kV
:
3.6V
:
LVDS Differential Line Driver
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The DS90LV011ATMF/NOPB is a high-speed single Differential Driver optimized for high data rate and low power applications. The DS90LV011A is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short-circuit fault current is also minimized. The device is designed to support data rates in excess of 400Mbps (200MHz) utilizing Low Voltage Differential Signalling (LVDS) technology. The LVDS outputs have been arranged for easy PCB layout. The differential driver outputs provide low EMI with its typical low output swing of 350mV. The driver can be paired with its companion single line receiver to provide a high-speed LVDS interface.
  • Conforms to TIA/EIA-644-A standard
  • 100ps Typical differential skew
  • 1.5ns Maximum propagation delay
  • ±350mV Differential signalling
  • Power off protection
  • Pinout simplifies PCB layout
  • 23mW Typical low power dissipation
  • Fabricated with advanced CMOS process technology
  • Green product and no Sb/Br

Applications

Industrial

Warnings

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Substitutes

Associated Products

Compare Selected