Low

TEXAS INSTRUMENTS  CDCLVD1204EVM  Evaluation Module, Low Additive Jitter Clock Buffer, CDCLVD1204

TEXAS INSTRUMENTS CDCLVD1204EVM
Manufacturer Part No:
CDCLVD1204EVM
Newark Part No.:
91R0390
Technical Datasheet:
See all Technical Docs

The actual product may differ from image shown

Product Overview

The CDCLVD1204EVM evaluation module is designed to demonstrate the electrical performance of the CDCLVD1204. The CDCLVD1204 are high performance, low additive jitter clock buffers. They have two universal input buffers that support single ended or differential clock inputs and are selectable through a control pin. The devices also feature On chip bias generators that can provide the LVDS common mode voltage to the device inputs. The CDCLVD1204 is specifically designed for driving 50Ohm transmission lines. In case of driving the inputs in single ended mode, the appropriate bias voltage should be applied to the unused negative input pin. The evaluation module (EVM) is designed to demonstrate the electrical performance of the CDCLVD1204 or CDCLVD2102. However, this EVM can also be used for customers interested in the CDCLVD1208 or CDCLVD2104 as well.
  • Easy to use evaluation board to fan out Low phase noise clocks
  • Easy device setup
  • Fast configuration
  • Control pins configurable through jumpers
  • Board powered at 2.5V
  • Single ended or differential input clocks
  • Device supports four LVDS outputs, EVM supports two LVDS outputs
These devices have limited built in ESD protection. The leads should be shorted together or device placed in conductive foam during storage or handling to prevent electrostatic damage to MOS gates.
It is important to operate this EVM within the input voltage range of -0.2V to Vcc +0.2V and the output voltage range of -0.2V to Vcc +0.2V .

 

Product Information

Silicon Manufacturer:
Texas Instruments
Silicon Core Number:
CDCLVD1204
Kit Application Type:
Clock & Timing
Application Sub Type:
Clock Buffer
Kit Contents:
SCAS898, 2:4 Low Additive Jitter LVDS Buffer (Rev. A), 4 LVDS Outputs Clock Buffer Evaluation Board
Product Range:
-
Features:
Easy Device Setup, Fast Configuration, Control Pins Configurable Through Jumpers
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Applications

  • Communications & Networking
  • Medical
  • Test & Measurement
  • Wireless
  • Clock & Timing

Notes

It is important to operate this EVM within the input voltage range of -0.2V to Vcc +0.2V and the output voltage range of -0.2V to Vcc +0.2V .

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.