Low

TEXAS INSTRUMENTS  BQ24650RVAT  Battery Charger for 4 Cells of Lead Acid, LiFePO4, Li-Ion,Li-Pol battery, 28Vin, 10A charge, VQFN-16

TEXAS INSTRUMENTS BQ24650RVAT
Technical Data Sheet (10.21KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The BQ24650RVAT is a synchronous switch-mode integrated Battery-charge Controller for solar power with maximum power point tracking provides input voltage regulation, which reduces charge current when input voltage falls below a programmed level. When the input is powered by a solar panel, the input regulation loop lowers the charge current so that the solar panel can provide maximum power output. The BQ24650 offers a constant-frequency synchronous PWM controller with high accuracy current and voltage regulation. The charge controller charges the battery in three phases such as pre-conditioning, constant current and constant voltage. Charge is terminated when the current reaches 1/10 of the fast charge rate. The pre-charge timer is fixed at 30 minutes. The charge controller automatically restarts the charge cycle if the battery voltage falls below an internal threshold and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.
  • Maximum Power Point Tracking (MPPT) capability by input voltage regulation
  • Programmable MPPT setting
  • Resistor programmable float voltage
  • ±0.5% Charge-voltage regulation
  • ±3% Charge-current regulation
  • ±0.6% Input voltage regulation
  • Internal loop compensation
  • Internal digital soft start
  • Input over-voltage protection
  • Battery temperature sensing
  • Battery absent detection
  • Thermal shutdown
  • Charge status outputs for led or host processor
  • Charge enable on MPPSET pin
  • Automatic sleep mode for low power consumption
  • <15μA Off-state battery discharge current
  • Green product and no Sb/Br
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

 

Product Information

Battery Type:
Lead Acid, LiFePO4, Li-Ion, Li-Pol
Input Voltage:
28V
Battery Charge Voltage:
26V
Charge Current Max:
10A
Battery IC Case Style:
VQFN
No. of Pins:
16Pins
No. of Series Cells:
4
Operating Temperature Min:
-40°C
Operating Temperature Max:
125°C
Packaging:
Cut Tape
Product Range:
-
MSL:
MSL 2 - 1 year
SVHC:
No SVHC (15-Jun-2015)

Find similar products  grouped by common attribute

Applications

  • Power Management;
  • Automotive

Legislation and Environmental

Moisture Sensitivity Level:
MSL 2 - 1 year
Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Substitutes

Battery Charger for 4 Cells of Lead Acid, LiFePO4, Li-Ion,Li-Pol battery, 28Vin, 10A charge, VQFN-16

TEXAS INSTRUMENTS

750 in stock

Price for: Each (Supplied on Full Reel)

250+ $3.83 500+ $3.42 1000+ $2.59

Buy

IC, BATT CHARGER, LI-ION, 10A, VQFN-16

TEXAS INSTRUMENTS

239:  in stock

Price for: Each (Supplied on Cut Tape)

1+ $6.35 10+ $5.71 25+ $5.32 50+ $5.04 More pricing

Buy
BQ24650RVAR

BQ Solar

TEXAS INSTRUMENTS

0

Price for: Each (Supplied on Full Reel)

3000+ $2.25

Buy

Associated Products

Similar Products