SF2 - 

Filter Cap, Dust and Particles, SHT2x Humidity and Temperature Sensors


The actual product may differ from image shown

Manufacturer Part No:
Newark Part No.:
Technical Datasheet:
See all Technical Docs

Product Information

SHT2 Humidity and Temperature Sensors
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The SF2 from Sensirion is a filter cap for use with SHT2x humidity and temperature sensor. This filter cap protects SHT2x sensors against dust, water immersion as well as against contamination by particles. The cavity inside is made such that the volume between membrane and sensor is kept minimal and hence the impact on response time for humidity measurements is reduced to a minimum. The filter cap SF2 is available in black colour with a white filter membrane and made of a single piece of Polybutylene Terephthalate (PBT) with a filter membrane welded on it. SF2 filter cap is designed to be mounted after soldering by clipping the four pins into openings in the PCB. Together with the sensor it provides a compact entity which may serve as an adaptor to the device housing. Adding adhesive for seal to PCB and using an O-ring, it serves for a waterproof mounting solution.
  • Operating temperature range from -40°C to 125°C
  • IP67 rated
  • UL94 V-0 flammability rating
  • PTFE with polyester scrim filter material
  • Filter thickness is 0.13mm
  • Filter pore size is 1.5μm




Do not use this product as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.


Compare Selected
Manufacturer Part Number
Newark Part No.
Manufacturer / Description
Price For

Associated Products

Compare Selected