Low

8.06.02 J-LINK 9-PIN CORTEX-M - 

J-Link Adapter, Adapts From 20 Pin JTAG Connector to 9 Pin FTSH Connector

SEGGER 8.06.02 J-LINK 9-PIN CORTEX-M

The actual product may differ from image shown

Manufacturer:
SEGGER SEGGER
Manufacturer Part No:
8.06.02 J-LINK 9-PIN CORTEX-M
Newark Part No.:
91T5770
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
J-Link Adapter
:
-
:
Cortex-M Devices
:
Adapts from 20 Pin JTAG Connector to 9 Pin FTSH Connector
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The 8.06.02 J-LINK 9-PIN CORTEX-M allows JTAG, SWD and SWO connections between J-Link and Cortex-M based target hardware systems. It adapts from the 20 pin 0.1inch JTAG connector to a 9 pin 0.05inch Samtec FTSH connector as defined by ARM. The J-Link 9 pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pin out. By default, TRST is not connected, but the Cortex-M Adapter comes with a solder bridge (NR1) which allows TRST to be connected to pin 9 of the Cortex-M adapter.

Applications

Embedded Design & Development

Contents

Adapter, 9 pin cable.