Low

SEGGER  8.06.02 J-LINK 9-PIN CORTEX-M  ADAPTER, J-LINK, 9 PIN, FOR CORTEX-M

SEGGER 8.06.02 J-LINK 9-PIN CORTEX-M
Technical Data Sheet (170.49KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The 8.06.02 J-LINK 9-PIN CORTEX-M allows JTAG, SWD and SWO connections between J-Link and Cortex-M based target hardware systems. It adapts from the 20 pin 0.1inch JTAG connector to a 9 pin 0.05inch Samtec FTSH connector as defined by ARM. The J-Link 9 pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pin out. By default, TRST is not connected, but the Cortex-M Adapter comes with a solder bridge (NR1) which allows TRST to be connected to pin 9 of the Cortex-M adapter.

 

Product Information

Accessory Type:
J-Link Adapter
For Use With:
Cortex-M Devices
Features:
Adapts from 20 Pin JTAG Connector to 9 Pin FTSH Connector
Product Range:
-

Find similar products  grouped by common attribute

Applications

  • Embedded Design & Development

Contents

Adapter, 9 pin cable.

Legislation and Environmental

Authorized Distributor

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.