5.09.01 FLASHER STM8 - 

Flash Programmer, For STM8 MCUs, USB2.0 Interface


The actual product may differ from image shown

Manufacturer Part No:
5.09.01 FLASHER STM8
Newark Part No.:
Technical Datasheet:
See all Technical Docs

Product Information

Programmer STM8, USB Cable, Ethernet Cable, 4Pin Ribbon Cable, RS232 Cable, USB Power Supply
In-Circuit Debugger / Programmer
Flash Programmer for STM8 Series Flash MCU, USB2.0 Interface
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The 5.09.01 is a Flasher STM8 flash programmer for ST's STM8 series of flash microcontrollers with on chip flash. It is a programming tool for microcontrollers with on chip flash memory and STM8 core. This programmer is designed for programming flash targets with a PC program or stand alone. Flasher STM8 connects via USB, via Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista or Windows 7. It has a built in 10 pin interface connector and a built in 4 pin interface connector, which are compatible with the debug connectors used by STM8 eval systems. The Flasher STM8 programmer can be operated from a PC with an appropriate software like Flasher STM8 software or in stand alone mode. It has been designed to allow downloading to the target as fast as the target can receive and program flash.
  • Integrated optical isolation between host and target system
  • Standard 4 pin SWIM connector
  • USB 2.0 interface
  • Full duplex 100Mbit Ethernet interface
  • Target voltage can be measured and monitored during program
  • Fully plug and play compatible
  • Stand alone SWIM programmer
  • Data files can be updated via PC program
  • Three boot modes: PC mode, stand alone mode, MSD mode
  • Target power supply via pin 1 of the 4 pin interface


Embedded Design & Development


Flasher STM8 programmer, USB cable, Ethernet cable, RS232 cable, Standard 4 pin SWIM ribbon cable.