Low

OPTO 22  G4OAC5  Digital Output Module, AC Output 12–140 Vac, 5 Vdc Logic

OPTO 22 G4OAC5
Technical Data Sheet (200.79KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The G4OAC5 is a G4 digital AC Output Module used to control or switch AC loads. Module provides up to 4000V of optical isolation (transient) between field outputs and the control side of the circuit and each features zero voltage turn-on and zero current turn-off. AC output modules are equivalent to single-pole single-throw normally open contacts (Form A, SPST-NO). Each module is equipped with a 4 amp fast-blow fuse. The fuse breaking capacity is 40 amps at 250 VAC. Current should be limited to prevent the short circuit current from exceeding the rated breaking capacity of the fuse. Typical applications for AC output modules include switching loads such as AC relays, solenoids, motor starters, heaters, lamps and indicators.
  • Built-in LED status indicator
  • Removable fuse
  • 3A at 45°C Current rating
  • Ability to withstand one-cycle surge of 80 amps
  • -30 to 70°C Operating temperature range

 

Product Information

Current Rating:
2A
Product Range:
-
External Width:
12.2 mm
RoHS Compliant:
No
No. of Digital Outputs:
1
Length:
48.8 mm
Signal Input Type:
4 to 8VDC
Accessory Type:
Digital AC Output Module
SVHC:
No SVHC (17-Dec-2015)
External Depth:
41.1 mm
Voltage Rating:
120 VAC

Find similar products  grouped by common attribute

Applications

  • Lighting;
  • Motor Drive & Control;
  • HVAC;
  • Automation & Process Control;
  • Consumer Electronics

Legislation and Environmental

RoHS Compliant:
No
Authorized Distributor

Substitutes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.