Low

OLIMEX  AVR-ISP-MK2  Programmer, USB 2.0, PDI, Program tiny AVR using TPI Interface & mega AVR using ISP Interface

OLIMEX AVR-ISP-MK2
OLIMEX AVR-ISP-MK2
Technical Data Sheet (537.58KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

OLIMEX AVR-ISP-MK2
OLIMEX AVR-ISP-MK2

Product Overview

The AVR-ISP-MK2 is a programmer for Atmel 8bit AVR microcontrollers with ISP, PDI or TPI interfaces. Using the AVR Studio software, designers can program tinyAVR and megaAVR devices using the ISP Interface, tinyAVR devices using the TPI interface, and AVR XMEGA devices using the PDI Interface.
  • Tested and working with AVR Studio 4, AVR Studio 5, ATMEL Studio 6
  • Connects to PC via USB 2.0 full speed
  • No need for external power supply as it takes the power supply from USB
  • Uses Atmel's 2x5 pin ICSP and 2x3 pin PDI and TPI connector layout
  • Works with 5V and 3.3V targets (selectable) and can supply target with power
  • Programs both flash and EEPROM
  • Supports fuses and lock bit programming
  • Upgradeable for future device support
  • Supports target voltages from 1.8V to 5.5V
  • Adjustable ISP programming speed (50Hz to 8MHz SCK frequency)
The AVR-ISP-MK2 comes in a plastic cover but make sure boards and devices interfacing with the programmer are properly grounded.

 

Product Information

Supported Families:
Kit Contents:
Programmer
Features:
Program tiny AVR using TPI Interface & mega AVR using ISP Interface
Product Range:
-
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Embedded Design & Development

Legislation and Environmental

RoHS Compliant:
Yes
Independent Distributor

Substitutes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.