Low

NXP  SC16IS740IPW,112  UART Interface, 1 Channel, 5 Mbps, 2.3 V, 3.6 V, TSSOP, 16 Pins

NXP SC16IS740IPW,112
Manufacturer:
NXP NXP
Manufacturer Part No:
SC16IS740IPW,112
Newark Part No.:
70R8982
Technical Datasheet:
See all Technical Docs

The actual product may differ from image shown

Product Overview

The SC16IS740IPW,112 is a single UART IC, provides slave I²C-bus/SPI Interface to a single-channel high performance UART. It offers data rates up to 5Mbps and guarantees low operating and sleeping current. This family of products enables seamless protocol conversion from I²C-bus or SPI to and RS-232/RS-485 and are fully bidirectional. Its internal register set is backward-compatible with the widely used and widely popular 16C450. This allows the software to be easily written or ported from another platform. It also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support and software reset. This allows the software to reset the UART at any moment, independent of the hardware reset signal.
  • Single Full-duplex UART
  • Selectable I²C-bus or SPI Interface
  • 3.3 or 2.5V Operation
  • 64-byte FIFO (Transmitter and Receiver)
  • Fully Compatible with Industrial Standard 16C450 and Equivalent
  • Baud Rates up to 5Mbps in 16x Clock Mode
  • Auto Hardware Flow Control Using RTS/CTS
  • Auto Software Flow Control with Programmable Xon/Xoff Characters
  • Single or Double Xon/Xoff Characters
  • Automatic RS-485 Support (Automatic Slave Address Detection)
  • RS-485 Driver Direction Control Via RTS Signal
  • RS-485 Driver Direction Control Inversion
  • Built-in IrDA Encoder and Decoder Interface
  • Software Reset
  • Transmitter and Receiver can be Enabled/Disabled Independent of Each Other
  • Receive and Transmit FIFO Levels
  • Programmable Special Character Detection
  • Line Break Generation and Detection
  • Internal Loopback Mode
  • Sleep Current less than 30µA at 3.3V

Product Information

No. of Channels:
No. of Channels:
1 Channel
Data Rate:
5Mbps
Supply Voltage Min:
2.3V
Supply Voltage Max:
3.6V
Interface Case Style:
TSSOP
No. of Pins:
16Pins
Operating Temperature Min:
-40°C
Operating Temperature Max:
85°C
Packaging:
Each
Product Range:
-
Automotive Qualifications Standard:
-
MSL:
MSL 1 - Unlimited
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Applications

  • Industrial
  • Automation & Process Control
  • Portable Devices
  • Power Management
  • Consumer Electronics

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Substitutes

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.