Low

NXP  LPC4330FBD144,551  ARM Microcontroller, ARM Cortex-M4, 32bit, 204 MHz, 264 KB, 144 Pins

NXP LPC4330FBD144,551
Manufacturer:
NXP NXP
Manufacturer Part No:
LPC4330FBD144,551
Newark Part No.:
78T6062
Technical Datasheet:
See all Technical Docs

The actual product may differ from image shown

Product Overview

The LPC4330FBD144,551 is a 32-bit Microcontroller based on ARM Cortex-M4 digital signal controller with an ARM Cortex-M0 coprocessor operates at a maximum frequency of 204MHz. The ARM Cortex-M4 core offers single-cycle Multiply-Accumulate and SIMD instructions and a hardware floating-point unit to support signal processing while the M0 coprocessor handles I/O and digital control processing. The device incorporates 264kB internal RAM, two high speed USB 2.0 Host/OTG/Device, 8-channel 10-bit A/D converter, 10-bit D/A converter and 83 general-purpose I/O pins. This device also features peripherals like four UARTs, two I2C, three SPI modules and two I2S. The ARM Cortex-M0 coprocessor is code and tool compatible with the Cortex-M4 core. The Cortex-M0 coprocessor offers with a simple instruction set and reduced code size and hardware multiply is implemented as a 32-cycle iterative multiplier.
  • Built-in memory protection unit (MPU) supporting eight regions
  • Built-in nested vectored interrupt controller (NVIC)
  • Hardware floating-point unit
  • Non-maskable Interrupt (NMI) input
  • JTAG and serial wire debug (SWD), serial trace, eight breakpoints and four watch points
  • Enhanced trace module (ETM) and Enhanced trace buffer (ETB) support
  • System tick timer
  • Crystal oscillator with an operating range of 1MHz to 25MHz
  • 12MHz Internal RC (IRC) oscillator trimmed to 1.5 % accuracy
  • Ultra-low power real-time clock (RTC) crystal oscillator
  • Serial GPIO (SGPIO) interface
  • State configurable timer (SCTimer/PWM) subsystem on AHB
  • Global input multiplexer array (GIMA)
  • Quad SPI flash interface (SPIFI)
  • 10/100T Ethernet MAC with RMII and MII interfaces and DMA support
  • High-speed USB 2.0 Host/Device/OTG & high speed USB 2.0 Host/Device interface
  • External memory controller (EMC)
  • LCD controller with DMA support
  • Secure digital Input/output (SD/MMC) card interface
  • Four general-purpose timer/counters with capture and match capabilities

 

Product Information

Architecture:
ARM Cortex-M4
No. of Bits:
32bit
CPU Speed:
204MHz
Program Memory Size:
-
RAM Memory Size:
264KB
No. of Pins:
144Pins
MCU Case Style:
LQFP
No. of I/O's:
83I/O's
Embedded Interface Type:
CAN, ENET, I2C, I2S, SPI, UART, USB
Supply Voltage Min:
2.2V
Supply Voltage Max:
3.6V
Packaging:
Each
Product Range:
ARM Cortex-M4 Microcontrollers
MSL:
MSL 3 - 168 hours
SVHC:
No SVHC (17-Dec-2015)
Automotive Qualifications Standard:
-

Find similar products  grouped by common attribute

Applications

  • Motor Drive & Control;
  • Power Management;
  • Logistics;
  • RF Communications;
  • Embedded Design & Development;
  • Industrial;
  • Automation & Process Control;
  • Metering

Legislation and Environmental

Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Associated Products