Low

IDRN-RTD/N - 

Signal Conditioner, iD Series, RTD Input, Current, Voltage Output, 10 to 32 Vdc

NEWPORT ELECTRONICS IDRN-RTD/N

The actual product may differ from image shown

Manufacturer Part No:
IDRN-RTD/N
Newark Part No.:
19C7488
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
32VDC
:
Current, Voltage
:
-
:
RTD
:
0.5°C
:
-5°C
:
10VDC
:
-
:
-
:
55°C
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The IDRN-RTD/N is a Programmable Signal Conditioner/Transmitter provides highly accurate, stable, isolated measurement of RTD temperature sensors. The iDRN-RTD provides a fully scalable analogue output that is proportional to the input signal. The output of the iDRN-RTD can be user set for 0 to 10 V, 4 to 20mA or 0 to 20mA. Input scaling and configuration of other operating parameters is accomplished by connecting to a standard RS-232 port of a personal computer and using the Windows-based setup software. Once configured the settings may be stored in non-volatile memory and the unit disconnected from the PC. The Optional EIT-D iServer module can connect up to thirty-two (32) iDRX RS-485 Signal Conditioners to an Ethernet network and the Internet using standard TCP/IP protocol. The iServer can also be used as a simple Serial to Ethernet "bridge" or converter to connect a single iDRN RS-232 device to an Ethernet network and the Internet.
  • Software selectable input types
  • 100ohm Pt, 500ohm Pt, 1000ohm Pt
  • 1800V Isolation
  • 0.1°C Resolution
  • ±0.5°C Accuracy
  • Free setup and configuration software
  • Factory setup and configuration available at No Charge (for iDRN Analogue Output models)

Applications

Automation & Process Control, Communications & Networking