Skip to main content

Low

MULTICOMP MC-RP001-CLR Dev Board Enclosure, Raspberry Pi, Transparent, ABS

Richmedia (3.96KB) EN

Technical Data Sheet (246.89KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Video

Product Overview

The MC-RP001-CLR from Multicomp is a raspberry Pi enclosure This enclosure has base and cover moulded in a smooth finish ABS plastic. Base has side clips which positively locate the Raspberry Pi board into position allowing it to be operated with or without the cover in place giving easy access to the GPIO and JTAG. Base comes with four rubber feet and also features two screw slots to allow the enclosure to be vertically mounted.

Cover can be easily removed without the need to unplug any cables
Cover has a tunnel recess to allow viewing of the operation LEDs
Vented base and cover to allow through air flow
Clear colour enclosure

Compatible with Raspberry Pi 1 Model B

Product Information

For Use With:: Raspberry Pi 1 model B
External Height:: 31.25mm
External Width:: 63.5mm
External Depth:: 99.13mm
Enclosure Material:: ABS (Acrylonitrile Butadiene Styrene)
Body Color:: Transparent
Product Range:: -
SVHC:: To Be Advised

Find similar products grouped by common attribute

Applications

Industrial;
Safety

Also Known As

GTIN UPC EAN: 5051259039940

Notes

Compatible with Raspberry Pi 1 Model B

Legislation and Environmental

RoHS Compliant:: Yes

Authorized Distributor

Substitutes

Dev Board Enclosure, Raspberry Pi Sandwich, Red, ABS

BUD INDUSTRIES

681 in stock

Price for: Each

1+ $4.93 Promotional price 6+ $4.93 Promotional price 50+ $4.58 Promotional price 100+ $4.26 Promotional price

Miscellaneous Richmedia Technical Data Sheet}

Yes

Buy

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Manufacturer:: MULTICOMP MULTICOMP
Newark Part No.:: 07W8936
Manufacturer Part No: MC-RP001-CLR
Also Known As: GTIN UPC EAN: 5051259039940

4,249 In stock

Available in quantity shown
Contact us for more availability

4,249 in stock for same day shipping

see cut-off times

$2.95 $ 2.95

Price for:: Each

Minimum order quantity:: 1

Order multiple quantity:: 1

Quantity

Buy

Spotted an Error?

Print Page

Add to Favorites

$

Price

Quantity	List Price	Your Price
1 - 9	$3.84	Promotional price $2.95
10 - 99	$3.64	Promotional price $2.95
100 - 499	$3.44	Promotional price $2.95
500 - 999	$3.24	Promotional price $2.95
1000+	$3.11	Promotional price $2.95

Looking for larger Quantities?
Submit a request to our quote specialists

Technical Docs

Technical Data Sheet (246.89KB) EN

Customer Reviews

MULTICOMP - MC-RP001-CLR - RASPBERRY PI ENCLOSURE, ABS, CLEAR 4.4 5 12 12

Looks good, works great. Just right! This case is just right. No screws or glue or sticky tape to keep it together. It's a two piece case that clips together very sturdily. There is an opening, like a tunnel, just over the set of LEDs that acts like a lens to spread the light. Since the case is clear, this makes the status lights show well even when viewing the pi from the side. You don't have to be directly over the pi to see it's working. In addition to the perfectly sized ports for USB, CAT5, audio, video and SDMC card there are two sets of vents on the bottom. Overall this case works well and clear just looks cool. January 20, 2015

High quality This product works great for keeping the raspberry pi safe. November 21, 2014

Good Case For RPI This case holds the raspberry pi perfectly and the case feels solid. It even has 2 holes on the back for mounting it on a wall or something else. January 18, 2014

Good case I got this case when I got my RPI. It worked great until I wanted to start using the GPIO. As others have said there is no room for any cables to leave, but I now run this without the top attached. With just the bottom it is still a good product. For me it helps to keep the bottom of the pi from accidentally coming into contact with things that it shouldn't. Over all, if you want a case and don't plan on using the GPIO, or you just want a cheap platform for your pi to sit on, get this one. September 6, 2013

Great case! This is a great, inexpensive case for your Pi! It has holes for all the jacks on the perimeter of the board, which line up perfectly. However, it does not allow access to the GPIO headers; if you plan to add daughter cards or expansion boards, you may want to keep looking. Separating the halves of the case is easy......after you figure it out. I have to admit it took me a while to get it done the first time (no instructions provided), because I was being very careful about it. August 7, 2013

2 3 Next>>

Customer Q&A Exchange

(There are 2 questions : 2 answers on this product)

Product Q&A

Ask your questions. Share your answers.

Browse Q&A

Search Q&A

Search Questions

Need Product Support?

If you need immediate technical support use Live Support or Contact Us.

This space is yours...

Use this space to Ask your peers product questions or Answer those questions posted by them.

Ask a Question

Sort by

expand all answers |

collapse all answers

Q:

1 answer

Clear cases available for Raspberry Pi 512MB new model?

Details:

As a gift for my son I'd like to buy him a transparent case for Raspberry Pi 512MB (the new model). Can you tell me which cases work for this one?
Thanks! Mom of Tech Enthusiast

2 years, 6 months ago

by

Anonymous

Answer this Question

0points

0out of 0found this question helpful.

Was this helpful?(0)(0)

Report Abuse

Answers

A:

For Raspberry Pi clear case, you can go for either Newark part 07W8936 or 44W3465.
Part # 07W8936 has currently lead time of 2 weeks whereas part # 44W3465 stock coming in end of Dec.

2 years, 6 months ago

by

TechGTC

Staff
Expert

0points

0out of 0found this answer helpful.

Was this helpful?(0)(0)

Report Abuse

Q:

1 answer

GPIO access, do you sell cases with it?

Details:

These cases do not allow for access to the GPIO pins, do you sell cases that do have access?

2 years, 4 months ago

by

joli

Answer this Question

0points

0out of 0found this question helpful.

Was this helpful?(0)(0)

Report Abuse

Answers

A:

For the part number “MC-RP001-CLR” To access the GPIO header, the cover of the case needs to be removed as there is no access point in the cover. The PI board remains in the base when the cover is removed as it snaps in place.

alternately you can consider Newark part number "92T3300" and "44W3465" which has provision on the casing where GPIO can be accessed

2 years, 4 months ago

by

TechGTC