MICROCHIP  PIC18F2520-I/SP  8 Bit Microcontroller, Flash, PIC18F2xxx, 40 MHz, 32 KB, 1.5 KB, 28, NDIP

MICROCHIP PIC18F2520-I/SP

Image is for illustrative purposes only. Please refer to product description.

  • Manufacturer:
  • Newark Part No.: 89H0594
  • Manufacturer Part No PIC18F2520-I/SP

Product Overview


The PIC18F2520-I/SP is an Enhanced Flash Microcontroller with 10-bit A/D and nanoWatt technology. The PIC18F2520 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance and power sensitive applications. The PIC18F2520 family incorporates a range of features that can significantly reduce power consumption during operation. The PIC18F2520 device include an internal oscillator block which generates two different clock signals, either can be used as the microcontroller's clock source. This may eliminate the need for external oscillator circuits on the OSC1 or OSC2 pins. The PIC18F2520 microcontroller can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground and the programming voltage.
  • CPU - Up to 10 MIPS performance and C compiler optimized RISC architecture
  • System - Watchdog timer with separate RC oscillator
  • nanoWatt power managed modes - Run, idle and sleep modes
  • Analogue - 10 channels, 100kSPS and programmable brown-out reset module
  • Peripherals - Master synchronous Serial Port supports SPI ™ and I²C™ master and slave mode
  • 100 years Typical flash/data EEPROM retention
  • Self-programmable under software control
  • Priority levels for interrupts
  • 8 x 8 Single-cycle hardware multiplier
  • In-Circuit Debug (ICD) via two pins

Applications

Power Management; Industrial; Computers & Computer Peripherals
ESD sensitive device, take proper precaution while handling the device.
Back to top

Product Specifications, Documents & More


  • CPU Speed: 40MHz
  • Controller Family/Series: PIC18F2xxx
  • Core Size: 8bit
  • EEPROM Memory Size: 256Byte
  • Embedded Interface Type: EUSART, I2C, SPI
  • MCU Case Style: NDIP
  • MSL: -
  • No. of I/O's: 25
  • No. of PWM Channels: 2
  • No. of Pins: 28
  • No. of Timers: 4
  • Operating Temperature Max: 85°C
  • Operating Temperature Min: -40°C
  • Oscillator Type: External, Internal
  • Packaging: Each
  • Peripherals: ADC, Comparator, PWM, Timer
  • Program Memory Size: 16 kWords
  • Program Memory Size: 32KB
  • RAM Memory Size: 1.5KB
  • SVHC: No SVHC (15-Jun-2015)
  • Supply Voltage Max: 5.5V
  • Supply Voltage Min: 4.2V
  • Supply Voltage Range: 4.2V to 5.5V

Find similar products  grouped by common attribute

View this product in our online catalog


This product also features on the following pages and catalog editions:

  •  131/36
  •  132/36

Availability

Availability:  159


  • 159 in stock for same day shipping
 
Check stock and lead times
    More stock available week commencing 4/11/16

Price for: Each 1

Minimum order quantity: 1

Order multiple quantity: 1

Price: $3.98 $3.98

Buy

Price

Quantity List Price
1 - 25 $3.98
26 - 99 $3.89
100+ $3.79
 
 
Low

Legislation and Environmental


Back to top

Similar Products


Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.

Back to top

Customer Reviews


Customer Q&A Exchange


(There is 1 question : 1 answer on this product)

Product Q&A

Ask your questions. Share your answers.

 
 
Browse Q&A
 
 
Search Questions
Need Product Support?
If you need immediate technical support use Live Support or Contact Us.
This space is yours...
Use this space to Ask your peers product questions or Answer those questions posted by them.
Details: 
Looking for an in-system programmer which can be used to program 8 bit MCU (part number PIC18F2520-I/SP)?
2 years, 11 months ago
by
NewarkTechSupp
0points
0out of 0found this question helpful.
Was this helpful?(0)(0)

Answers

A: 
Suggested part number of in system programmer which can be used to program this MCU is PG164130 from Microchip. This tool allows debugging and programming of PIC and dsPIC flash microcontrollers using the powerful GUI of MPLAB IDE.
2 years, 11 months ago
by
NewarkTechSupport
0points
0out of 0found this answer helpful.
Was this helpful?(0)(0)
1 of 1
  • 2015-06-11T15:24:21.386-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_89H0594, prod, sort_default
1 of 1
Back to top

Community


Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.
Back to top

Associated Products


Customers Also Bought