Low

PIC16F886-I/SO - 

8 Bit Microcontroller, Flash, PIC16F, 20 MHz, 14 KB, 368 Byte, 28 Pins, SOIC

MICROCHIP PIC16F886-I/SO

The actual product may differ from image shown

Manufacturer:
MICROCHIP MICROCHIP
Manufacturer Part No:
PIC16F886-I/SO
Newark Part No.:
74K8576
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
24I/O's
:
20MHz
:
AEC-Q100
:
Each
:
PIC16F
:
28Pins
:
EUSART
:
SOIC
:
2V
:
14KB
:
-
:
5.5V
:
368Byte
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The PIC16F886-I/SO is a 8-bit flash-based CMOS Microcontroller. It features 256bytes of EEPROM data memory, self programming, an ICD, 2 comparators, 11 channels of 10-bit Analogue-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire serial peripheral interface (SPI™) or the 2-wire inter-integrated circuit (I²C™) bus and an enhanced universal asynchronous receiver transmitter (EUSART). The Analogue-to-Digital converter (ADC) allows conversion of an analogue input signal to a 10-bit binary representation of that signal. This device uses analogue inputs, which are multiplexed into a single sample and hold circuit. The output of the sample and hold is connected to the input of the converter. The converter generates a 10-bit binary result via successive approximation and stores the conversion result into the ADC result registers (ADRESL and ADRESH).
  • Software selectable frequency range of 8MHz to 32kHz
  • Fail-safe clock monitoring for critical applications
  • Clock mode switching during operation for low-power operation
  • Power-saving sleep mode
  • Power-on reset (POR)
  • Selectable brown-out reset (BOR) voltage
  • Extended watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation
  • In-circuit serial Programming™ (ICSP™) via two pins
  • In-circuit debug (ICD) via two pins
  • High-endurance flash/EEPROM cell
  • Self-reprogrammable under software control
  • Programmable code protection
  • Capture/compare/PWM (CCP) module
  • Enhanced capture/compare/PWM (ECCP) module with auto-shutdown and PWM steering
  • Master synchronous serial port (MSSP) module SPI™ mode, I²C™ mode with address mask capability

Applications

Automotive, Industrial, Consumer Electronics

Warnings

ESD sensitive device, take proper precaution while handling the device.

Substitutes

Associated Products

Compare Selected