Low

MICROCHIP  ENC28J60-I/SP  Ethernet Controller, 10 Mbps, IEEE 802.3, 3.1 V, 3.6 V, DIP, 28 Pins

MICROCHIP ENC28J60-I/SP
Technical Data Sheet (1.18MB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The ENC28J60-I/SP is a stand-alone Ethernet Controller with an industry standard serial peripheral interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI. The ENC28J60 meets all of the IEEE 802.3 specifications. It incorporates a number of packet filtering schemes to limit incoming packets. It also provides an internal DMA module for fast data throughput and hardware assisted checksum calculation, which is used in various network protocols. Communication with the host controller is implemented via an interrupt pin and the SPI, with clock rates of up to 20MHz. Two dedicated pins are used for LED link and network activity indication.
  • Fully compatible with 10/100/1000Base-T networks
  • Integrated MAC and 10Base-T PHY
  • Supports one 10Base-T port with automatic
  • Polarity detection and correction
  • Supports full and half-duplex modes
  • Programmable automatic re-transmit on collision
  • Programmable padding and CRC generation
  • Programmable automatic rejection of erroneous packets
  • SPI interface with clock speeds up to 20MHz
  • 8kB transmit/receive packet dual port SRAM
  • Configurable transmit/receive buffer size
  • Hardware managed circular receive FIFO
  • Byte-wide random and sequential access with auto-increment
  • Medium Access Controller (MAC) supports uni-cast, multicast and broadcast packets
ESD sensitive device, take proper precaution while handling the device.

 

Product Information

Data Rate:
10Mbps
Ethernet Type:
IEEE 802.3
Supply Voltage Min:
3.1V
Supply Voltage Max:
3.6V
Controller IC Case Style:
DIP
No. of Pins:
28Pins
IC Interface Type:
SPI
Operating Temperature Min:
-40°C
Operating Temperature Max:
85°C
Packaging:
Each
Product Range:
-
Automotive Qualifications Standard:
-
MSL:
-
Supply Current:
180 mA
Supply Voltage Range:
3.1V to 3.6V
No. of Ports:
1
SVHC:
No SVHC (17-Dec-2015)
Digital IC Case Style:
DIP

Find similar products  grouped by common attribute

Applications

  • Industrial;
  • Communications & Networking

Legislation and Environmental

Moisture Sensitivity Level:
-
Product Traceability
RoHS Compliant:
Yes
Authorized Distributor

Associated Products