Low

MICROCHIP  DSPIC30F6014A-30I/PF  DIGITAL SIGNAL CONTROLLER-DSC, 16 BIT, 144KB 40MHZ 5.5V TQFP-80

MICROCHIP DSPIC30F6014A-30I/PF

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The DSPIC30F6014A-30I/PF is a 16-bit general purpose Digital Signal Controller with CPU core has a 24-bit instruction word. The Program Counter (PC) is 23-bit wide with the least significant bit (LSb) always clear and the most significant bit (MSb) is ignored during normal program execution, except for certain specialized instructions. Thus, the PC can address up to 4M instruction words of user program space. An instruction prefetch mechanism is used to help maintain throughput. Program loop constructs, free from loop count management overhead, are supported using the DO and REPEAT instructions, both of which are interruptible at any point.
  • Modified Harvard architecture
  • C-compiler optimized instruction set architecture
  • 84 base instructions with flexible addressing modes
  • 24-bit wide instructions, 16-bit wide data path
  • 16 x 16-bit working register array modes
  • DSP engine - Modulo and bit-reversed addressing modes
  • Peripheral features - 3-wire SPI™ modules
  • 12-bit 200kSPS analogue-to-digital converter (A/D)
  • Enhanced flash program memory - 10,000 erase/write cycle (minimum)
  • Data EEPROM memory - 100000 erase/write cycle (minimum)
  • Self-reprogrammable under software control
  • Power-on reset (POR), power-up timer (PWRT) and oscillator start-up timer (OST)
  • Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
  • Fail-safe clock monitor operation - Detects clock failure & switches to on-chip LP RC oscillator
  • Programmable code protection
  • In-Circuit Serial Programming™ (ICSP™)
  • Programmable brown-out detection and reset generation
  • Selectable power management modes - Sleep, idle and alternate clock modes
  • Low power, high speed CMOS flash technology

Applications

Industrial; Power Management; Motor Drive & Control; Automotive
ESD sensitive device, take proper precaution while handling the device.

Customers Also bought

Product Information

Product Range:
AEC-Q100 dsPIC30F Series
Core Frequency:
40MHz
Core Supply Voltage:
5.5V
DSC Case Style:
TQFP
No. of Pins:
80Pins
Embedded Interface Type:
CAN, I2C, SPI, UART
No. of I/O's:
68I/O's
Supply Voltage Min:
2.5V
Supply Voltage Max:
5.5V
Flash Memory Size:
144KB
Operating Temperature Min:
-40°C
Operating Temperature Max:
85°C
Packaging:
Each
MSL:
MSL 3 - 168 hours
Supply Voltage Range:
2.5V to 5.5V
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Legislation and Environmental

Moisture Sensitivity Level:
MSL 3 - 168 hours
Product Traceability
RoHS Compliant:
Yes

Applications

  • Industrial;
  • Power Management;
  • Motor Drive & Control;
  • Automotive

Associated Products

Recently Viewed

Product Recommendations