Low

LINEAR TECHNOLOGY  LT1228CS8#PBF  Transconductance Amplifier, Video, 1 Amplifier, 15 V, 100 MHz, -13.5 V, 13.5 V, SOIC

LINEAR TECHNOLOGY LT1228CS8#PBF

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The LT1228CS8#PBF is a 100MHz current Feedback Amplifier with DC gain control. The LT1228 makes it easy to electronically control the gain of signals from DC to video frequencies. The LT1228 implements gain control with a transconductance amplifier (voltage to current) whose gain is proportional to an externally controlled current. A resistor is typically used to convert the output current to a voltage, which is then amplified with a current feedback amplifier. A complete differential input, gain controlled amplifier can be implemented with LT1228 and just a few resistors. The LT1228 transconductance amplifier has a high impedance differential input and a current source output with wide output voltage compliance. The transconductance, gm is set by the current that flows into Pin 5, ISET. The small signal gm is equal to ten times the value of ISET and this relationship holds over several decades of set current. The voltage at Pin 5 is two diode drops above the negative supply, Pin 4.
  • Very fast transconductance amplifier
  • Outputs swing within 0.8V of supplies
  • gm = 10 x ISET
  • Low THD (0.2% at 30mVRMS input)
  • Wide ISET range (1µA to 1mA)
  • Very fast current feedback amplifier bandwidth (100MHz)
  • 0.04% Differential gain
  • 0.1° Differential phase
  • High input impedance (25MΩ, 6pF)
  • Wide supply range (±2 to ±15V)
  • Inputs common mode to within 1.5V of supplies
  • 7mA Supply current

Applications

Imaging, Video & Vision; Signal Processing

Customers Also bought

Product Information

No. of Amplifiers:
1 Amplifier
Supply Voltage:
15V
Gain Bandwidth:
100MHz
Input Voltage Min:
-13.5V
Input Voltage Max:
13.5V
Amplifier Case Style:
SOIC
No. of Pins:
8Pins
Output Current Min:
30mA
Output Current Max:
125mA
Slew Rate:
500V/µs
Input Resistance:
0.025ohm
Operating Temperature Min:
0°C
Operating Temperature Max:
70°C
Packaging:
Each
MSL:
MSL 1 - Unlimited
Output Current Range:
30mA to 125mA
Input Voltage:
± 13.5V
Product Range:
-
SVHC:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute

Legislation and Environmental

Moisture Sensitivity Level:
MSL 1 - Unlimited
RoHS Compliant:
Yes

Applications

  • Imaging, Video & Vision;
  • Signal Processing

Recently Viewed

Product Recommendations