Low

LT1006S8#PBF - 

Operational Amplifier, Single, 1 Amplifier, 600 kHz, 0.4 V/µs, ± 2V to ± 18V, SOIC, 8 Pins

LT1006S8#PBF - Operational Amplifier, Single, 1 Amplifier, 600 kHz, 0.4 V/µs, ± 2V to ± 18V, SOIC, 8 Pins

The actual product may differ from image shown

Manufacturer Part No:
LT1006S8#PBF
Newark Part No.:
57M0724
Availability:
New product

Product Information

:
1 Amplifier
:
600
:
0.4
:
± 2V to ± 18V
:
SOIC
:
8
:
0
:
70
:
Each
:
-
:
-
:
Yes
:
MSL 1 - Unlimited
:
No SVHC (15-Jan-2018)
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LT1006S8#PBF is a first precision single supply Operational Amplifier. Its design has been optimized for single supply operation with a full set of specifications at 5V. Specifications at ±15V are also provided. The LT1006 has a low offset voltage of 20μV, drift of 0.2μV/°C, offset current of 120pA, gain of 2.5 million, common mode rejection of 114dB and power supply rejection of 126dB. Although supply current is only 340μA, a novel output stage can source or sink in excess of 20mA while retaining high voltage gain. Common mode input range includes ground to accommodate low ground-referenced inputs from strain gauges or thermocouples and output can swing to within a few millivolts of ground. If a higher slew rate (in excess of 1V/μs) or micropower operation (supply current down to 90μA) is required, the operating currents can be modified by connecting an external optional resistor to pin 8.
  • 50μV Maximum guaranteed offset voltage
  • 1.3μV/°C Maximum guaranteed low drift
  • 0.5nA Maximum guaranteed offset current
  • 520μA Maximum guaranteed low supply current
  • 250MΩ Minimum high input impedance

Applications

Industrial, Sensing & Instrumentation, Signal Processing

New product

Customer Reviews

Customer Q&A Exchange

Community

Like to see information about this product from other customers?

 Read discussions, blogs, documents from our community members.

Filters:

Select document type(s) you want to see and click “Apply Filters” button
Post a question to one of our experts or start a discussion and get responses from supplier experts and fellow engineers in our community.