Low

LATTICE SEMICONDUCTOR  HW-DLN-3C  IN CIRCUIT TOOL, FPGA, ISPDOWNLOAD (PC ONLY)

LATTICE SEMICONDUCTOR HW-DLN-3C
LATTICE SEMICONDUCTOR HW-DLN-3C
Technical Data Sheet (152.52KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

LATTICE SEMICONDUCTOR HW-DLN-3C
LATTICE SEMICONDUCTOR HW-DLN-3C

Product Overview

The HW-DLN-3C is a ispDOWNLOAD cable designed to facilitate in system programming for all Lattice Semiconductor ISP devices directly from a PC. With in system programmability, hardware functions can be programmed and modified in real time on the system board to give additional product features, shorten system design and debug cycle time, enhance product manufacturability and simplify field upgrades.
  • Ideal for design prototyping and debugging
  • 1.2V to 5V programming
  • Easy to use programming connectors
Always connect the ispDOWNLOAD cable GND pin (black wire), before connecting any other JTAG pins. Failure to follow this procedures can result in damage to the target programmable device.
The target board must be un powered when connecting, disconnecting or reconnecting the ispDOWNLOAD cable.

 

Product Information

Silicon Manufacturer:
Silicon Family Name:
-
Core Architecture:
FPGA
Core Sub-Architecture:
-
IC Product Type:
In-Circuit Debugger / Programmer
Silicon Core Number:
Kit Contents:
Programmer with attached leads and cable,1X8 + 2X5 pos and parallel port adapters
No. of Bits:
Features:
6' USB cable, Flywire connections,1X8 + 2X5 pos and parallel port adapters
Product Range:
-
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Embedded Design & Development

Contents

ispDOWNLOAD cable, 1 x 8 connector, 2 x 5 connector.

Notes

The target board must be un powered when connecting, disconnecting or reconnecting the ispDOWNLOAD cable.

Legislation and Environmental

Associated Products