Low

INTERSIL  X9C503PZ  Non Volatile Digital Potentiometer, 50 kohm, Single, 3 Wire, Serial, Linear, ± 20%, 4.5 V

INTERSIL X9C503PZ
Technical Data Sheet (231.79KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The X9C503PZ is an Intersils' Digitally Controlled (XDCP) Potentiometer. The 50kΩ device consists of a resistor array, wiper switches, a control section and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.
  • Three-wire serial interface
  • 100 Wiper tap points - Wiper position stored in non-volatile memory and recalled on power-up
  • 99 Resistive elements - Temperature compensated and ±20% End-to-end resistance
  • Low power CMOS - 3mA maximum current and 750µA maximum standby current
  • High reliability - 100000 data changes per bit endurance
ESD sensitive device, take proper precaution while handling the device.

 

Product Information

End To End Resistance:
50kohm
No. of Pots:
Single
Control Interface:
3 Wire, Serial
Track Taper:
Linear
Resistance Tolerance:
± 20%
Supply Voltage Min:
4.5V
Supply Voltage Max:
5.5V
Potentiometer IC Case Style:
DIP
No. of Pins:
8Pins
No. of Steps:
100
Temperature Coefficient:
± 300ppm/°C
Operating Temperature Min:
0°C
Operating Temperature Max:
70°C
Packaging:
Each
Product Range:
Single 100-Tap Non-Volatile Digital Pots
Automotive Qualifications Standard:
-
MSL:
-
Memory Type:
-
Supply Voltage Range:
4.5V to 5.5V
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Signal Processing

Legislation and Environmental

Moisture Sensitivity Level:
-
Product Traceability
RoHS Compliant:
Yes
Authorized Distributor