INTERSIL ISL6115EVAL1Z ISL6115, POWER DISTRIBUTION CONTROLLER, EVALUATION BOARD
Image is for illustrative purposes only. Please refer to product description.
- Manufacturer: INTERSIL
- Newark Part No.: 04P7603
- Manufacturer Part No ISL6115EVAL1Z
- Application Sub Type: Hot Swap Controller
- Features: Power Distribution Control, Overcurrent Fault Isolation, Hot Plug Components
- Kit Application Type: Power Management
- Kit Contents: Board Only
- SVHC: No SVHC (17-Dec-2014)
- Silicon Core Number: ISL6115
- Silicon Manufacturer: Intersil
The ISL6115EVAL1Z is an evaluation board to evaluate the performance of ISL6115 power distribution controller. The current regulation level is set by 2 external resistors, RISET sets the CR Vth and the other is a low ohmic sense element across, which the CR Vth is developed. The CR duration is set by an external capacitor on the CTIM pin, which is charged with a 20µA current once the CR Vth level is reached. If the voltage on the CTIM capacitor reaches 1.9V the IC then quickly pulls down the GATE output latching off the pass FET. Fully featured hot swap power controllers targets applications in the +2.5V to +12V range. The ISL6115 is for +12V control. Each has a hard wired under voltage (UV) monitoring and reporting threshold level approximately 80% of the aforementioned voltage. The ISL6115 has an integrated charge pump allowing control of up to +16V rails using an external N Channel MOSFET.
- HOT SWAP single power distribution control
- Overcurrent fault isolation
- Programmable current regulation level
- Programmable current regulation time to latch off
- Rail to rail common mode input voltage range
- 1µs response time to dead short
- Under voltage and overcurrent Latch Indicators
- Adjustable turn on ramp
- Protection during turn on
- Two Levels of overcurrent Detection Provide Fast Response to Varying Fault Conditions
- Power Management
ESD sensitive device, Take proper precaution while handling the device.
Find similar products grouped by common attribute
|Quantity||List Price||Your Price|
Promotional price $107.76
Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.
Customer Q&A Exchange
Like to see information about this product from other customers?
|Newark Part No.||Manufacturer Part No||Manufacturer / Description||Avail||Price||Qty|
HOT SWAP POWER CONTROLLER, 8-SOIC; Controller Applications:Power Distribution Control, Hot Plug Components and Circuitry; Input Voltage:-; Supply Voltage Min:10.2V; Supply Voltage Max:13.8V; Controller IC Case Style:SOIC; MSL:- ;RoHS Compliant: Yes
Non-Cancelable / Non Returnable
Products not normally stocked that show available inventory, are in stock up to the quantity displayed. Additional quantities will ship with lead time displayed.