Low

INTERSIL  HIP4080AIBZ  MOSFET Driver IC, Driver, Full Bridge, 9.5V-15V Supply, 2.6A Out, 50ns Delay, SOIC-20

INTERSIL HIP4080AIBZ
Technical Data Sheet (720.99KB) EN See all Technical Docs

The actual product may differ from image shown

Product Overview

The HIP4080AIBZ is a high frequency medium voltage Full Bridge N-channel FET Driver IC. The HIP4080A includes an input comparator, used to facilitate the "hysteresis" and PWM modes of operation. Its HEN (high enable) lead can force current to freewheel in the bottom two external power MOSFETs, maintaining the upper power MOSFETs off. Since it can switch at frequencies up to 1MHz, the HIP4080A is well suited for driving voice coil motors, switching power amplifiers and power supplies. HIP4080A can also drive medium voltage brush motors and two HIP4080As can be used to drive high performance stepper motors, since the short minimum "on-time" can provide fine micro-stepping capability. Short propagation delays of approximately 55ns maximize control loop crossover frequencies and dead-times which can be adjusted to near zero to minimize distortion, resulting in precise control of the driven load.
  • Drives N-channel FET full bridge including high side chop capability
  • Bootstrap supply maximum voltage to 95VDC
  • Drives 1000pF load at 1MHz in free air at 50°C with rise and fall times of typically 10ns
  • User-programmable dead time
  • Charge-pump and bootstrap maintain upper bias supplies
  • DIS (Disable) pin pulls gates low
  • Input logic thresholds compatible with 5 to 15V logic levels
  • Very low power consumption
  • Under-voltage protection
ESD sensitive device, take proper precaution while handling the device.

 

Product Information

Driver Configuration:
Full Bridge
Peak Output Current:
2.6A
Supply Voltage Min:
9.5V
Supply Voltage Max:
15V
Driver Case Style:
SOIC
No. of Pins:
20Pins
Input Delay:
40ns
Output Delay:
50ns
Operating Temperature Min:
-40°C
Operating Temperature Max:
85°C
Packaging:
Each
Product Range:
-
Automotive Qualifications Standard:
-
Module Configuration:
Full Bridge
Device Type:
MOSFET Driver
MSL:
MSL 2 - 1 year
Supply Voltage Range:
9.5V to 15V
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Power Management;
  • Motor Drive & Control;
  • Computers & Computer Peripherals

Legislation and Environmental

Moisture Sensitivity Level:
MSL 2 - 1 year
RoHS Compliant:
Yes
Authorized Distributor

Substitutes

HIP4080AIBZT

IC, PERIPHERAL DRVR

INTERSIL

0

Price for: Each (Supplied on Full Reel)

1000+ $3.06 2000+ $2.86 3000+ $2.70

Buy

MOSFET Driver, 4 outputs, Full Bridge, 9.5V-15V supply, 2.5A output, SOIC-20

INTERSIL

0

Price for: Each

100+ $5.50

Buy
HIP4080AIBT

IC,Motor Controller,CMOS,SOP,20PIN

INTERSIL

0

Price for: Each (Supplied on Full Reel)

1000+ $4.71 2000+ $4.45 3000+ $4.13

Buy

Associated Products