.3030AN30 - 

Speed Sensor, Magnetic, Industrial, High Output, M16, 24DP, Module 1.06, 190 V p-p, 910 ohm, 450 mH


The actual product may differ from image shown

Manufacturer Part No:
Newark Part No.:
Technical Datasheet:
See all Technical Docs

Product Information

Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The 3030AN30 is a high output Variable Reluctance Speed Sensor designed for use in applications where higher output voltages are needed. It performs the best at low to medium speeds with medium to high impedance loads. Front-end sealed version is available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) magnetic speed sensor is simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor pole piece (sensing area) changes the flux lines of the magnetic field and dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals.
  • Self-powered operation
  • Direct conversion of actuator speed to output frequency
  • Simple installation
  • No moving parts
  • Designed for use over a wide range of speeds
  • Adaptable to a wide variety of configurations
  • 5/8 in (M16), 3/8 in (M12) housing diameters
  • Stainless steel threaded or smooth housing materials/styles
  • MS3106 connector preleaded terminations


Sensing & Instrumentation, Industrial, Automotive, Avionics